Hi, I had a Spotted Gum Timber Floor ( 10mm Real Solid Timber Single Planks ) in a penthouse apartment for 8 years . It was pre-coated in high gloss clear from the factory . When it was laid it was necessary to have a noise reduction 3mm foam under layer ( apartments underneath building noise requirement) . This method of installation actually made the floor very quiet and it also made it a little softer to walk over . When it got any scuff marks, they just easily wiped off with a damp cloth. When I sold the penthouse, the floor was in exactly the same condition as the day it was first laid - first class. It was only ever cleaned with a steam cleaner , no chemicals whatsoever . I would certainly recommend the pre-coated polyurethane gloss finish on the real timber planks to anyone, it was great ! You can just see a glimpse of the kitchen floor in the attached two images. Good luck with your specifying . High quality surface finishes normally stand the test of time . I have added a couple of extra images of the penthouse for interest. We did the interior design fit out after buying the shell from the developer. It was a stunning sky home . Cheers LAADP

Your tile will co-ordinate beautifully with the timber if you can pick one of the darker colours out of the timber and select a tile in this family of colour. The trick to making a colour concept work is to either co-ordinate or contrast. If your timber is as busy with grain and colour as the image you've shown, then maybe co-coordinating is the best way to go. Never chose materials independently of each other - always take a tile sample home to see in the natural light, next to the timber. I hope it all works out the way you envisage it. Cheers, Michelle

Cabots have a Hunter Grey stain. You can use this on the wood of your choice. And lots of pre finished floating floors have a grey wash colour. Anywhere from Bunnings to Carpet Choice to Royal Oak Floors will stock the pre finished boards.

i'm guessing that a problem could be that the boards will shrink and create drafty gaps so i think my old builder dad would have laid the boards upside down, without nails to settle to the temperature and moisture in the room while he did other jobs for a week or two and then turned over the boards and, using a solid timber length to push the boards tight as possible before nailing and he would have probably appreciated the idea of adding some under floor insulation as well