Your house is going to blend in very well with it's surrounds once the timber has silvered off, if you choose to use colours like Colorbond Woodland Grey, Dulux "Pavings Stone" (left hand side of colour swatch in the image far below) and/or Dulux "Grey Mountain". Other darker colours that will work well in this setting include Dulux "Cambridge Hall" and Dulux "Nomadji" (mentioned before). These greys don't necessarily blend in with the fresh timber but look fantastic as the timber ages and the building is seen as a whole (see image far below). "Paving Stone" is a versatile medium, warm grey that looks really good as a render. It also works well as a neutral internal wall colour in rooms with lots of natural light. In the following image, Dulux "Grey Mountain" was used near the timber work and "Woodland Grey" on the garage walls to help the garage door become less noticeable. Remember that colours generally appear lighter than the sample when applied to external walls and darker when applied to internal walls.

I've just been looking at your colours, I think the Dulux Dieskau would work the best with the other colours you have to work with, choosing colours is such a personal thing and I know it can be really hard to choose and hope you make the correct choice. Oskuee is right, a paint job can look terrible half way through so you need to make sure you finish to get the proper look of colour. But the biggest thing to remember is it's only paint and it's the cheapest thing to change so if your not happy with the colour you choose you can always try something else. Happy redecorating :)

Hi Tyrone_Topsecret. I think the dark at top with the light colour under works very well - let's the upper floor disengage and float above everything, which makes it so stunning. Your render picture shows a texture effect on the matrix which is nice - if you go for a solid colour there that'll appear very different to what you see at the moment - would still work of course, but I'd probably try and do a 'marble' texture effect like that (if within budget). If it was me, I would blend the bessa in with the render colour at the bottom, so either paint the blocks to match the render, or why don't you do it the other way around and match the render colour to the natural block colour? That could work well. I don't know the Resene colour you mention, attached is a picture with a Monument colorbond roof, and the little link building we've done in a Dulux colour matched to Monument - so it works quite well as a contrast without being too stark against an (off-)white. I wouldn't go the night sky, it is quite stark (and cold) as a colour, where as with a softer/warmer dark grey it all becomes more harmonious. Not sure about the garage door : You are currently drawing attention to it by matching it to the colour of the upstairs - I would recommend to try and guide the view to upstairs instead, and therefore blend the garage door in with the surrounding surfaces. So Bessa natural, render to match, garage door in a warm white, and then the dark grey upstairs - will be a stunner :-) Good Luck !

Thanks heaps Lesley. We ended up choosing timeless grey as the main render and sticking with all our previous choices. We found a house being built in it literally a few streets away so have seen it in all lights and weather conditions and feel it will look good. Fingers crossed!!