Please help: looking at pics of Pine online is driving me a bit mental
3 years ago
last modified: 3 years ago
Featured Answer
Sort by:Oldest
Comments (6)
- 3 years ago
- 3 years ago
Related Discussions
Please help me jazz up my lounge/dining, im so bad at this!
Comments (19)Hi Zoe, what a lovely space, great neutral floor and curtains, your lounge and dining set perfect, I think you do know what you like just look at the photos you have posted, the only thing missing in your space are the personal bits and pieces. Take all of the above photos with you to Kmart and use them as a reference to purchase, good thing is you can change them if you feel it doesn't work. Your room really needs lights/ lamps, are you able to fit a hanging lamp above the table, what type of ceiling lights does the apartment have The other big thing is the entertainment wall needs bulking up, you need something taller and wider this can be made up with a couple TV height(Taller) cabinets on either side of the current TV, the speaker system needs a home and arranging, Kmart is bound to have something, or check out Salvo's etc they often have those old Pine timber entertainment units that old TV's sat into. With a light sand, white wash and a sealing coat they come up a treat Love your rug but it's a bit small, in the meantime I think I would line up against the lounge so it's not lost. Good advice Nelson Interiors, love Kmart and Bunnings to help with stretching the budget, Zoe don't over look Buniings for furnishing your room, work benches etc also make great TV stands and side boards, they also have a large lighting section cheers...See MoreLooking for a smart looking study without spending a fortune- ideas?
Comments (10)Thanks OKLOUISE, I think we will go down the suggested route. IKEA was not much cheaper for the desk once installed anyway. The IKEA handlefree wardrobes will come in much cheaper than the alternative but look pretty good for what we want and will leave a space of about 5 cm at either end of the room after allowing for the skirting boards, which is just enough to clean occasionally. I just need to check that IKEA's shade of white is not too dissimilar to the deck colour I want and then I should be good to go. I am hoping the floor is not too uneven as that could cause them to have gaps between? (Any ideas if that is a problem?) My only other worry is that IKEA white laminates used to turn yellow quickly, but I am hoping they have improved on that front in recent years. Thanks again, your advice is always good!...See MoreCan houzzers help me renovate our 1980s kitchen?
Comments (28)Could you swap the fridge with the wall oven, going by your photo both fridge and Wall Oven would fit side by side. I would definately have the fridge on the cook top wall and not on the other side of the kitchen. I see by the photo that the timber beam could be in the way, I would speak to your plumber who should have a simple solution on ducting the range hood. A simple one built into a special cabinet above the cooktop can recirculate or be ducted outside by either exposed stainless tube for your industrial/country look or have the ducting boxed in, the ducting can be flexable so no problem avoiding beams....See MoreNew Home - Drive way - Steep/Slope into garage question
Comments (16)"I have a 4wd and you don’t need training to drive them" I was alluding to the people you sometimes hear about with an over-reliance on what the 4WD can do versus what they as a driver can do who find themselves needing rescuing, though not usually from a driveway, but then a driveway doesn't usually need a 4WD. Some people acquaint themselves with a new car sensibly, and some treat it like the different features effortlessly give them a new super-power, the idea that a new car could fix something about a driveway made me think of the latter. I'll add, if the builder were to build you something that forces you to buy a new car that's not normal. I'd be annoyed enough if the fridge or washing machine didn't fit, but a car! "I’d be concerned on the transition ie will the slope be a smooth gradient all along. A bump where the crossover meets your driveway can cause the bottom of the car to drag and scratch." Good question. You'd hope there'd be a standard for that. We had one car that was very prone to that and we've been over specific troublesome bumps on private driveways and public carparks which affected cars that were fine everywhere else. Some pics of where the crossover meets the road at the kerb from different angles would be useful. And then where the crossover joins the rest and starts changing angle, but that has not been poured yet, right? Will it be reinforced? Sorry to introduce yet another thought, but it's one we had fun with, so it's good to be able to help others avoid that. Or maybe they are reinforced as standard these days or in your jurisdiction? Never ceases to amaze me how things vary....See More- 3 years ago
- 3 years ago
- 3 years ago



VICTORIAN COASTAL FLOORS SAN REMO