Hi Sofia I definitely think brick lay would work better on the walls in the bathroom purely because you have a 30x30 on the floor and a 30x60 on the wall. You will find the tiles could look out of place trying to stack them. It would be a different matter if they did not share 1 or more dimension. Perhaps in the ensuite, consider doing something like this: [https://www.houzz.com.au/photos/what-architecture-beirutful-house-eclectic-patio-london-phvw-vp~14310278[(https://www.houzz.com.au/photos/what-architecture-beirutful-house-eclectic-patio-london-phvw-vp~14310278) Tile the floor and half way up the back wall with the "floor tiles", perhaps a tile or 2 above the vanity unit and then continue with the white tiles to the ceiling. You could hang your mirror so it covered about 1/4 of the "floor tile" and 3/4 of the white above the centre of the sink. In the main bathroom consider something like this: [https://www.houzz.com.au/photos/victorian-dream-bathroom-victorian-bathroom-london-phvw-vp~39122647[(https://www.houzz.com.au/photos/victorian-dream-bathroom-victorian-bathroom-london-phvw-vp~39122647) Tiling the back wall to the shower in the "floor tile" to the ceiling with the white tiles behind the loo to the ceiling. Alternatively, tiling the entire back wall with the "floor tiles". The first option may make the bathroom feel smaller if the shower takes up more than 1/3 of the back wall. Doing the two different options would give the bathrooms continuity, but also some individuality. I hope this helps. Look forward to perhaps seeing the outcome. James

because the water could seep through the joints between the new tiles and sit between the two layers and affect the seal and also raise the height of the floor and affect the slope to the waste outlets..but, why do you want to retile if you're not using the bathroom??...for immediate resale consider bathroom wall to wall bathroom carpet, new wall paint, new vanity, taps and light fittings which should also be cheaper than tiling over the top and, if it's not allowed by the body corporate, it will be a risk to future sales as it should not satisfy a proper building inspection

The size of floor tile: 300 x 300 mm and the size of wall tile: 300 x 600mm The floor tile and wall tile do not align at all. It looks unprofessional. Should the tiler redo the job? Thanks for your advice.

When it comes to kitchen design for a ranch house renovation, you may want to consider the following factors: Space and layout: Ranch houses typically have an open floor plan, so you can create a kitchen that flows seamlessly with the surrounding living areas. Consider the space available and the placement of windows and doors when deciding on the layout of your kitchen. Style: Ranch houses often have a mid-century modern or rustic aesthetic, so incorporate these design elements into your kitchen renovation. For example, you could use warm wood tones, clean lines, and vintage-inspired fixtures to create a timeless and inviting space. Storage: Adequate storage is essential in any kitchen, but it's especially crucial in a ranch house where storage space may be limited. Consider incorporating cabinets, shelves, and other storage solutions that maximize the available space without overwhelming the room. Lighting: Good lighting is essential in any kitchen, but it's particularly important in a ranch house where natural light may be limited. Consider incorporating a mix of ambient, task, and accent lighting to create a warm and welcoming atmosphere. Ultimately, the best kitchen design option for your ranch house renovation will depend on your specific needs and preferences. Consider working with a professional designer or architect to help create a space that meets your functional and aesthetic goals. You can contact house tiling services Sydney. They are professionals in tiling