We have a glass rangehood similar to Futuro Futuro's Acqualina Glass product and I love it. The top and bottom of the glass gets given a clean about once a week with citrus multi-purpose cleaning spray and then wiped down with a moistened glass cleaning cloth for a pristine finish. Takes around 5 minutes in total. Cleaning the brushed stainless part is more difficult. As mentioned previously, its hard to remove all the marks. Will definately try the WD40. Me, personally, I don't like the mirrored finish. Given the window is acting as the "splashback" I would have gone for something invisible like what Sheryl Horton showed.

Yes they do look like a mirror & the TV looks normal when on. Just choose your own frame, some profiles are suitable & others are not. The framer will advise you what will work. I have owned a picture framing shop in the past. Try to find a shop that has one set up as an example.

have a shorter recessed wall cabinet for storage and if necessary have the balance of the space fixed mirror.....you should find something suitable at a fraction of the cost of custom made but strongly suggest that you don't have the vanity hard up against the glass screen (a gap is useful for hanging a hair dryer or hand towel and allows easier access to clean the glass screen) we've been disappointed with custom made vanity and wall cabinets which were more than twice the price and no better quality

Thanks Margot. I think I've more or less got it sorted. The only challenge remaining, I think, is finding a way to give it a visual lift. It currently has floor to ceiling tiles in a standard size, square, and a very uninteresting colour with no texture - but in very good order. Very dull! I hate grout in showers so I'm thinking maybe some Mr Wetwall panelling or something similar over the tiles in the shower and on the new wall formed by moving the linen cpd, plus on a part wall along the long side of the shower to replace the glass screens that I insist must go (I'm a lazy cleaner and I hate cleaning glass!) Hopefully that would be enough to relieve the dullness of the existing tiles. Then some feature shelving over the new bath tub perhaps. Not yet decided whether to install a freestanding back-to-wall bath or a drop-in, but the latter might provide scope for some more feature tiling or panelling around it. I want to open the room directly to the outdoors but the current window opening is only 1200mm wide and the wall is 8 inches of solid concrete - not easy to cut to enlarge the opening - so I'm looking at either a hinged door with window inset into it or a standard size glass swing door with a narrow window beside for ventilation. My other challenge is doors for the relocated linen cpd, as the existing mirror doors have got to go! I loathe them. As the cpd will be visible from the living area, it needs stylish doors.