Thanks everyone for your comments, they are great! Of course everyone will have different tastes and function that appeal to them, otherwise a designer would have a very boring job!! Its always been on my mind though. I made acrylic also as they were much cheaper than glass, but come with their own issues as they warp, scratch and deteriorate, especially if you use cleaning materials. As for prints, I did this and it is a very fine line. I have seen the most hideous designs, patterns and prints it breaks my heart. Prints can lift off the glass with the glue so be very careful with this process and get a 10 year warranty!! A waterfall image in the shower for example, looks great for the first day and to create impact, but after a month ? Selling a house with one of these gets very interesting as many try to calculate the cost to replace. Again, some will love it and go for it! Just think hard about the impact it has on the house. Also glass splashbacks have some issues with shattering, especially with companies offering inferior glass based on price. So check how your glass is made!! Thanks again and enjoy.

The roof looks ok from the photos (no sag?) are they terracotta tiles? A pressure wash, reseal with clear and get the pointing re-done if needed- it will be brand new and cost you a fraction of what a new colourbond roof will. wuff- we've just replaced our very old iron roof with colourbond- the builder used roof blanket and batts- I seriously don't know when it is raining now (and our bed is build into a dormer and roof pitch!). I suspect the result is as quiet as tile, if not quieter. What is under the stucco? brick or fibro? I would probably just re-render in it's fibro. The cost of getting fibro (probably asbestos) off would be enormous! The cost of framing up for the weatherboards and the timber itself, equally enormous. The only advantage recladding gives you is the chance to re-insulate the walls. The rest is aeshetic, which could easily be achieved with fresh render in either of the colours you posted. Check out some of the new arcylic render texture-coats, they are almost maintenance free as the colour is in the render, this product is marketed as no repainting. You talk about the character of your area- your home contributes to that. Very few streets anywhere would have a uniform character. I love your cottage and can see so much scope to enhance it's character as it is.

Hi Macymacmaples, I would go for a 120cm to be sure that you are not splashing water everywhere. The latest trend is these single panel showers but they do come with their own challenges that need to be addressed by a professional. A shower tray with proper drainage is a great way to start. The most common errors we see in renovations with such showers is that the drainage has not been thought through - so the water runs everywhere. This makes keeping a clean bathroom impossible. If you want to ensure that water splashing/running is not an issue, I always recommend a properly water-tight shower box. But the decision depends on practicality VS aesthetics and the advice of your builder.

painted glass will be a perfect solution for your dilemma...my parents couldn't afford a solid bathroom door and solved the problem by painting a glass door with a dainty pattern by dabbing the brush rather than using sweeping strokes...paint lasted for many years and never needed redoing and i think a simple couple of coats to cover any missed spots will give an excellent result without any extra preparation than the usual wash and dry the surface and protect against drips