Yes you can and in your case I'd go for a bi-fold plantation shutter that folds to the left and still gives you access to the cabinet on the right... e.g. it will look like the "left half" (if that makes sense) of this... with the top or bottom (or both) 'bi-folding to the left, e.g. like the top of this (slightly wider in your case)...

Sorry haven't had any personal experiences to share but here are articles on Houzz you can check out on this topic – [High-Performing Shutters That Both Protect and Decorate Your Home[(https://www.houzz.com.au/magazine/plantation-shutters-are-they-right-for-your-home-stsetivw-vs~89935440) [Hardworking Plantation Shutters Deliver the Goods[(https://www.houzz.com.au/magazine/hardworking-plantation-shutters-deliver-the-goods-stsetivw-vs~39453769) Good luck!

I had similar dilemna and painted all woodwork including doors etc white, which I am happy with, it all ties together well.

I would definitely recommend three panels for the first window and two for the second in this instance. It will look far more consistent from the exterior of your home. We always match the configuration with the frames and mullions where possible for a neat finish. You can have each panel hinged individually, or have a bifold scenario... both would be acceptable solutions. You may have been recommended choosing a 4-panel configuration based on the type of shutters that particular retailer was quoting on. Different materials (timber, PVC, aluminium, etc) have different weight, and therefore different parameters for the maximum panel size. PVC is far heavier than timber or aluminium and can put strain on the hinges over a large expanse, causing them to sag slightly. The timber we use is Poplar - a forestry certified hardwood which is very lightweight and allows a lot of room for adjustment onsite (it's common for windows in older homes to be a little out of square because of movement over the years.) Timber can be made in larger panels than PVC, so your 2-pane window wouldn't be an issue.