It is just a great patio beer drinking table with a great view:) I couldn't get a picture of the table and the view because I didn't have the room with just a camera phone but this is the view from the top of the patio with it:)

I had a 2nd hand lovely resort style lounge (cane with fabric) which quickly became pulled and tatty after my 2 small dogs had been using it. The leather lounge & two large leather recliners I have show no damage (regardless of long or clipped nails) and both pets love these. Having a blanket the dogs know is theirs is a great idea especially with leather, as the initial cold feeling of leather means both dogs only want to be on the blanket.

yes to all, we did have the tiles professionally sealed, but sealing is not a cure all in my experience but I'm sure it helps considerable . my wife does buy those hand made goats milk styles soaps etc and I don't imagine there is anything more testing for stone, and yes it does mark. The Grey ( bane of my existence )granite much more so than the beige travertine ) I must admit though, the kids bathroom was almost non existent as one has sensitive skin and uses pump pack. I would also imagine climate, airing/ sunlight, volume of use and the time you have to manage it would also be contributing factors. We are way short on time and they don't get the attention they deserve, so I would suggest asking around, others may manage it better and it not be an issue. If your only doing your bathroom you may consider the risk factor not worth it for the volume, but for me, the advantage of travertine in the rest of the house far out weighs any marking issue in the showers, and wont stop me from using it again. To be honest when we sold the last house I just took to the shower with one of those paint scrapers with the razor in the end and most of it came off and it didn't detract from the look of the house. Sorry i have probably only muddied the waters even more, good luck with it.

I have only seen one wooden bench top that has managed, over time, to keep the wet out and avoid that black mouldy creepage where the water splashes behind the taps and around tap inserts. It was built by a carpenter and then the owner applied oil to gain the colour desired before applying several coats of marine epoxy (several = at least 5), sanded back before every new layer. It was burn proof and the colour locked in by epoxy coat with no maintenance required (until a visitor put a burning pot on it and left it there while attending to fire on stove, still... only left a black ring. That said, the owner promptly got out the sander and ground back until black ring was no longer charcoal texture, then reapplied oil and layered epoxy until black ring looked like it belonged (can't do that with any other surface I can think of?). After 15 years there is no sight of the insidious black mould from water penetration so I suppose it is the same recipe as with most thing successful projects in life, research, research, preparation, preparation, preparation and don't falter at the finish line.