I would stick with urban grey on the render. It will become the body of the exterior, and is neutral enough for living spaces not to feel to risky, bit still feel contemporary. Landscape against it will become the feature outdoors. Monument for colourbond as in gutters and fascia? Yes, as it will be the closest colourbond colour to the klavier used on the front ga de, and as they won't be seen at he same time, it is a best fit scenario. Although, I do not recommend it as a roof colour, and perhaps it isn't available in roofing anyway. This is because of the heat absorption. As it is low pitched but somewhat visible, I would go with a horizon colour, not introducing another one, rather just a construction tone, so for me either galvanized. So it remains a structural material rather than a fashion statement, or if you want something more polished, then I would go surf mist. The roof will disappear in this colour and blend into the sky, after all, the actual building from ground level will be all you see, and the roof will only be visible in relation to the building from a far. Neighbours will appreciate the unobtrusiveness of the surf mist, but you will save on energy costs Also. But of course, it is just an opinion, but one I'd be happy to stand behind for my own home. Good luck. Love to see pictures of your progress.

Bravo to all these amazing creative minds. I hate wasting stuff that still has life in it. By the way, though I have read that some pallets are treated with a fumigant which is toxic. Generally, make sure pallets are stamped with “HT”, which means they haven’t been exposed to chemicals (at least not in the treating process.) Avoid unmarked pallets or those with “MB” for methyl bromide. Well, if anyone wants some really nice, bargain 2nd hand windows we just pulled out of our 12 y-o house to make way for a sliding door, and you live around Melbourne Australia, please check them out here: http://www.ebay.com.au/itm/112070272414?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649

Well after a very (very very very) long time my Living Room is all but complete. There is some work to do behind the new steps and some trim to be put on the bookshelves. A light is to be put between the couches (that the electrical cable hanging down) and the wall lights are going to be removed. So just a quick rundown on what has been achieved; Two sky windows - Velux - roofing guy Sheeted under the beams - plasterer New carpet – Bunnings – carpet layer Closed off the old bar and put in a door – builder and plasterer Installed ceiling fans – Hunter, remote control, reversible – electrician Installed downlights - electrician Painted the endwalls – Solver Paint but Dulux Chine White colour - me Painted the ceiling – 2 x coats Solver Ceiling White over 2 x coats plaster board sealer - me New blinds (venetians) and curtains - from Spotlight - me Installed a gas bayonet heater (until I can afford a gas ‘wood’ fire for the fireplace – cripes they are expensive) – secondhand from Garage Sale - me Installed bookshelves – 2 x 202mm high + 2 x 106mm high Billy Bookshelf and 2 x Brimnes Cabinet - me Built and installed new steps and bench top on bookshelf – laminated Beech bench top, cut to size and routed, stained and oiled - me Sofas – Ikea Ektorp - me So some things I would have done differently. The downlights would be warm white not welding mask white. In fact I would re-think the whole light thing and possibly use lights with reflectors that were dark so that light was only reflected down. They would ‘lower’ the ceiling and make the room cosier I think. I kinda like the ceiling fans but had seen some which were awesome but really expensive. Then I saw ones very similar to the awesome ones but much cheaper but by then it was too late. I should have put bi-fold doors where the old bar was instead of a swinging door. I suspect that it will be unlikely now that I can use the room for its intended purpose. In fact with hindsight I coulda shoulda done the job myself rather than getting a builder in. It’s not as good as it should be and that has disappointed me. The bookshelves have come a up a treat – need to finish them off though with some trim. All from ‘Ikea’ except for the timber bench top. The bench top was a light bulb moment and breaks up the all-white appearance of the shelves. Also the white of the shelves and the white of the cabinet were slightly different and the bench has helped disguise that. The bench top and the steps were laminated beech panels from ‘Bunnings’ that I had cut to size. I stained them, put a router over the edge to round it off and then coated with Tung Oil. The bookshelves look bigger in real life than they do in the photos too. So now to sit and enjoy my handy work.

We had a house with a timber ceiling - it is a tricky decision. If it is a cheap display home build perhaps cover it, but if the quality is good it is a much harder decision. I think it looks good now and could be made very interesting. Also that look is "back". Make sure your lighting is very good and the heaviness will dissappear somewhat. The floor is lovely.