Here's the pic from there, why do you want it? I'm wondering if the extra corner might be a trip hazard

This explanation may help, Source: https://www.renovatorstore.com.au/blog/lighting-and-power-in-your-bathroom-the-simple-rules-to-be-safe/ REQUIREMENTS Zone 0: Inside the bath or shower. Any Lighting used here must have a minimum rating of IP67 (protected against immersion in water) Zone 1: Above the bath or shower to a height of 2.25m. A minimum rating of IP44 is required Zone 2: The area stretching to 0.6m outside the bath or shower and above the bath or shower if over 2.25m. An IP rating of at least IP44 is required Outside Zone: Anywhere outside zones 0, 1 & 2. Where water jets are not to be used for cleaning purposes, the general rules of BS7671 apply In addition to the above, if there is a likelihood of water jets being used for cleaning purpose in zones 1 and 2 a fitting rated a minimum IP65 must be used. Now that this has been explained, always make sure to purchase bathroom lighting according to these standards to make sure that your bathroom is always safe. You should also have this principle applied when you purchase other electrical devices such as heated towel rails, or a guide to where you'd put sockets in your bath for razors and other devices. This may also fix the common misconception that LED lights are not rated for bathrooms. Typical LED lights have an IP rating of IP66 which is more than the needed IP rating standard that bathrooms should have. - Not to mention you'd be saving a whole lot from energy bills in the long run.

I tried googling the product you listed and couldn't even find it! What kind of products do they do?

The building and construction industry has been thrown into a tailspin in the past year, with bushfires, importing difficulties due to COVID, lack of domestic production and the housing boom all contributing to a timber shortage – both across Australia and worldwide. With high demand for timber products, and insufficient supply to cater to this demand, builders and customers are experiencing long wait times for timber products, and often shortages of timber products they need to complete building projects. Structural framing timbers are one of the products most in demand – but there are other, non-structural support products which are also in short supply such as decking, fencing and cladding. Suppliers, buyers, builders and homeowners need to seek out alternatives to timber to use on their homes, in order to conserve low timber supplies and finish their projects sooner. One such product is DECO’s timber-look aluminium finish, DecoWood®. While DECO does not provide structural products, its DecoWood® products can be used on a variety of different applications where timber would normally be used. What is DecoWood®? DecoWood® is DECO Australia’s premium timber-look powder coat finish for aluminium. Utilising innovative sublimation technology, which transfers a woodgrain image into powder coated aluminium, DecoWood® replicates an authentic timber appearance, feel and form on a variety of aluminium building products. DecoWood® can be applied to almost any aluminium extrusion or flat sheet, and is frequently used for cladding, battens, windows and doors, slats and decking. More than 50% more durable than standard powder coating, DecoWood® does not release any harmful VOCs into the atmosphere, unlike the stains and paints often used on timber products to maintain them. DecoWood® products will also never need ongoing maintenance such as oiling or staining, and are available in over 150 natural woodgrain colours. Sustainable DecoWood® As well as being a viable timber alternative to take some of the pressure off the timber industry, DecoWood® is also a sustainable alternative to other building products commonly used in the building industry. Aluminium is one of the world’s most recyclable products – and 70% of the world’s recycled aluminium is still in use today. Aluminium’s strength and durability, combined with the durability of the DecoWood® finish, make it a long-lasting alternative that will not fade, peel, rot or warp as timber or composites may do over time, therefore reducing the frequency of replacement. An Australian-made Alternative Made in Australia, DecoWood® offers customers a quality product and finish with competitive lead times – builders and buyers need not worry about long wait times to import the product. Australian-made products are also tested to, and compliant with, the relevant Australian standards, ensuring you are purchasing a quality product.