Hi Kirsty, could you please advise the colour of your vanity and whether it is a custom made one and if not, could you let me know its name and where you bought it. Also, what is the colour of your floors tiles and where did you get them from. (I have come to the conclusion that charcoal/dark grey tile plus a much lighter grey tile plus white on some walls plus a timber vanity or timber accessories in bathroom , plus white (or close to it) below sink counter top is the way to go for a beautiful bathroom. The trick is figuring out exactly what proportion of each colour to use and where to put them for each particular layout.

Thanks everyone for their comments! Update: husband has 'over-ruled' on this one. Forgot to mention that the vanity top will be Night Sky Ceaserstone (ie black). So he wants the dark grout. We will definitely be using mould inhibitor and ensuring everything is well sealed. It's all his fault if it looks horrible ;) Will post photos once fully complete. (I am now a little scared...)

if the budget allows for it, porcelain tiles are my recommendation. They look better, have smaller grout lines, can get them to look like any modern stone, like marble, granite, travertine or even available in wood look slats. My hot tip is the less grout the better, which means the smaller the tile the more grout lines, stay away from mosaic on the floor, I've seen too often these being ripped out because the grout dates and ages from soap scum etc. After seeing grey, black and various colours on floors, I would always go with white on the floor, easy to keep clean and no fading of the tile profile. Good Luck!!

It actually looks like it was designed for a shower screen that was never installed, maybe because they ran out of money towards the end of the job? Frameless shower screens look fantastic when you can afford to put one in when you are renovating or building a new bathroom. Usually frameless shower screens have their anchoring points or recessed channels installed before tiling. It is actually quite tricky to retrofit a frameless shower screen neatly where there are existing tiles as the junction between the two materials needs to be watertight, and there may be uneveness in the tiles. You don't want to penetrate the waterproof membrane that is under the tiles with a retrofitted fixing for a frameless shower screen. I would suggest a semi-frameless screen which has a steel channel at the junction between the glass and the tiles which will be easier to keep clean, provide better support for the glass, and not be reliant on a silicone bead (which often goes mouldy in a shower recess). I would not have it longer than a metre as you will need at least 600mm clear to access the toilet. Extend it to the ceiling (see photo above) for better rigidity. A cheaper solution would be an L-shaped shower curtain rod and shower curtain! Best of luck Dr Retro of Dr Retro House Calls