Could you swap the fridge with the wall oven, going by your photo both fridge and Wall Oven would fit side by side. I would definately have the fridge on the cook top wall and not on the other side of the kitchen. I see by the photo that the timber beam could be in the way, I would speak to your plumber who should have a simple solution on ducting the range hood. A simple one built into a special cabinet above the cooktop can recirculate or be ducted outside by either exposed stainless tube for your industrial/country look or have the ducting boxed in, the ducting can be flexable so no problem avoiding beams.

You are kind to say that, Julie. Hubby also washed and polished the floorboards in the two rooms we decided to retain. They look much better as well. This has been fun project; don't quite know what I'll do with myself after it's completed! :) although, in saying that, there is the garden here to keep us occupied...!

Thank you everyone for your responses. I’m still undecided - I have a few weeks to consider what to do. The bench top salesperson showed me some photos of the few people who have added a small amount of benchtop stone to add some height (and it’s always because of a busy 60 x 30 patterned tile that the owners want to keep perfect) and in her words it looks ‘dicky’. Not least because the tile sits flatter against the wall than a 2cm thick slab of benchtop. It leaves a pronounced lip of 1.5cm where tile meets benchtop addition Then there’s the safety concerns mentioned above about flames near stone which I had not considered. Big reader - I love your maths but I’m only 150cm tall. Even with a low bench and oven height of 94cm (my oven’s lowest height setting) plus 70cm of tile between the bench and overheads, the cupboards are already 14cm above my head. This barely makes them usable for me even now! Adding another 15cm instead of the 10cm, while looking lovely and keeping the pattern intact, means my short-arse self will have real difficulty reaching anything safely. Every cm counts when you’re short! But I do appreciate your input!

Hi Mimi, Your stone (probably Marble or Reconstituted stone as these can be damaged by acids) has been factory finished by diamond polishing to get the gloss level it has. A sealer will only help protect that factory finish and unfortunately it will not bring it back. The bad news is it is not possible to repair and so removal and replacement is the only real fix. This may be covered if you have Accidental House Insurance, but other than this, I am afraid there is no easy fix, sorry. Hope this helps though, Malcolm.