We have four farmhouse style sinks in two different houses, and all present the same problem. It doesn't have anything to do with the material as two sinks are concrete, one stainless steel, and one composite stone. With the two kitchen sinks it's very frustrating spraying out the food particles from corner to corner. Food particles go from one side to the other, and it's very difficult to corral them to the drain. The two concrete bathroom sinks don't have enough slope, so when shaving and brushing teeth, the water and material flow to the opposite side of the sink. It's annoying to wash a 3' wide sink every time it's used. And gross if the sink isn't cleaned from side to side after every use. As a compromise, we're installing a farmhouse concrete bathroom sink with two drains and more slope. As I evaluate many things in life, a, farmhouse sink is a solutions looking for problem.

I have a shower over bath combo' which its plastic resin something? It's a old bungalow and pitifully small. The amount of times I have nearly slipped over getting out, or lost my balance with soap in my eyes/ or after having a glass of wine. hate hate it. I did see a shower room with a additional hand held device and a over head shower. I thought that good for the odd squirt your feet down. The next owners will probably rip it all out and start again any way when design ideas change.

sounds like a good use of space, you could install a pull out hotel clothes line, you know the one with the round fitting on one wall with a single pull out line which clips into a fitting on the other side. Attaching some photos the first is a bathroom that I would love to use to replace our existing ensuite (without replacing the window) which is as you enter the WC is behind the door to the left, right side is a nearly sunken bath with shower plus a large sliding window beside the bath, we think the architect hadn't allowed enough showering space so by adding the window gave extra width. Then we have a full width vanity and mirror on the third wall. The last should have a swimming pool style hand rail. Did you build your house, would love to see some more photos of the bathroom etc. cheers

Hi Joanna We love both! A common misconception we've found with freestanding baths and spas is that they're simply be too heavy to move around for cleaning purposes. To make cleaning manageable, our 100% Australian made baths and spas are manufactured using Gelcoat composite construction which is extremely strong yet not overly heavy (5mm thickness to ensure structural rigidity and increased thermal properties). So one of our baths is typically around the 40-50kg mark which allows most people to easily slide the bath out from the wall for easy cleaning access. Freestanding stone baths are a different story altogether! Regards, Brad AQVA Luxury Baths & Spas