Firstly...are you sure they are jarrah and not som other more exotic timber? If you are fortunate enough to have a genuine 1932 built cottage I say "Don't Do it!" Just look at the beautiful timber in that floor! It would be sinful to paint it. I have a 1924 cottage with beautiful hoop pine floorboards all from the day it was built. My suggestion is to have the boards sanded and polished. I would not even dare go near them with polyurethane. I have turned back the clock and used the methods of the period of the house...a mix of pale boiled linseed oil and kero. Put it on with a mop or a deck mop or a wool mop leave it soak in. Re-do and leave it soak in,,,( you won't get patches...the floors will just soak it up.) Third coat, add a bit of turps to the mix as a white ant deterrent. Then, when the floors look like they've soaked up enough, get a big old fashioned string mop...if you can find one...or use a deck scrubber and old towels...or even a wad of new ones...100% cotton...its worth it, and rub off as much of the surplus as possible...wear sox so you will notice when the sox do not get oil stained anymore. First go is a long process but you will be really pleased when the floors have had several "drinks". After that you could get just an ordinary floor varnish or oil or just a sealant. Some of the modern wood treatments are really good. Then, every so often do the boards over with your "Oil Mop". You will never find timber like that again and, in my experience, it adds to the value of the house big time. Do what you like to any gyprock and plastered walls but PLEASE love your floorboards and any natural timber...especially from that era. I've been in this old cottage for 32 years. Everyone wants to know where I sourced the "new" floorboards", and who did I get to make my silky oak windows! Hope that helps.

Not that I have seen - what we could do is a plantation shutter and then use a Crimsafe build-out to attach the security screen - you need to have it so that the shutter can open and it not protrude in to the screen - the challenge I see is that there will be a fairly large gap between each door to allow them to pass each other You might be better to look at using a commercial door section a slimline fixed louvre and then having your screen at the rear - this would allow a much better fit and also slide - but it would not be an opening type shutter Sorry best ideas I have for now - if you need anything else or me to do a rough sketch so you can approach someone in your area let me know Regards Heather

Here's a video of an area of water damaged bamboo being removed and replaced Joyzzz. Maybe you'll consider replacing the area in front of your fridge. Like you I also have bamboo in the kitchen (and pot plants throughout the house), but haven't had any issues with spills marking the floor. It's a shame there's so much variation in the manufacturing process resulting in some floors tolerating spills and others not at all. I do have a damaged board though thanks to a guest leaving a tap running causing an overflow...that I wasn't told about until days later, grrr. Fortunately the damage is in a shadowed corner and the sealer is still intact, so it isn't noticeable, just a wrinkled surface to the touch. Which is lucky, because our home is earth-covered and there is nowhere for water to drain out of the sub-floor as we "tanked" it with a sealer to ensure no moisture can make its way in. That board sat there in a puddle for days! I still wonder why only one board suffered damage, very strange...

G'day Folks, My wife and I, like Jess (Strons) am a very proud owners of Nore Furniture, still used daily, and purchased in the late 70's! The collection includes a dining Table/dining and lounge chairs, coffee/lamp tables, and a Buffet. Interstingly, when we have visitors, the two Nore lounge chairs in the lounge are always taken before the modern lounge suite is used. (which annoys me, as the Nore furniture are the more comfortable by far) The remaining items are used in our Family/Ding area. Due to having constant use over the last 6 years with grand children, several of these magnificent pieces of Art are needing a little lift, re damaged finish. If your father does remember the stain details, I would appreciate his advice! The pride, skill, and love that went into this furniture still shines thru to this day! Cheers Dennis