Well, I did a trial with a few tiles and then covered them with polyurethane. The trial didn't necessarily go entirely to plan but I was able to establish that PU will be too soft. Epoxy is likely to yellow even indoors, so that leaves me with the following solution: 1. make the tiles thicker (not a big deal) use tile selection and a thicker tile bed to enable a relatively flat surface to be made 3. seal it with a thin polyurethane to protect from mess Thanks for the contributions.

My suggestion is first talk to the builder to see what instructions he gave the tiler as i'm sure he doesn't want a dissatisfied client. Most tilers will check with the builder before grouting especially when a colour is not specified in a contract. I would then ask if the grout could be replaced, from the looks of it it will only be a couple of hours work. There is nothing worse than having to look at something you are not happy with. I would not use the paint product as it will alway look like it is covering a mistake. White will look better. Make sure the mixer body is waterproofed or you will have a leak in your wall, the membrane should lap onto the body from the wall if it is done well. All the best.

I have white floor tiles. We used the plain, concrete grey. Best thing ever. Easy to keep clean and break up the plain look. Good luck !

This is a very personal choice as dreamer mentioned. You can order tile samples from tile cloud or TileMall for $15 for 5. Pick some options you like and put up in the kitchen next to the other elements. You will soon know which one you love the most 👍🏻