What material is the gray countertop? Un-oiled soapstone?
junkyarddog1
8 years ago
Featured Answer
Sort by:Oldest
Comments (6)
Stacey Cochrane-Taylor
7 years agoRelated Discussions
Resilient Buildings for Global Warming
Comments (155)Well if your over designing and putting in more then what is required you are just becoming a part of the problem. Because the amount of energy that has gone into manufacturing your home and each material in it. Those materials require energy to produce them..... On the other hand yes there is that question what if there is not enough can we trust government policy. I think our focus should really be how can we design homes that design for current conditions, have a zero and no carbon footprint and the costs of manufacturing do not offset this goal. So I do place my trust in the science and research from the CSIRO. And policy that has been created as a result of their research yes....See MoreHelp! Cedar weatherboard house update
Comments (80)Here is the old house..lower cedar undergoing clean and is now all oiled. Window trims on right painted in dune. Ok. So had heart attack yesterday. Roof painter came out. I am at work. He and my son decided to ‘colormatch’ my already woodland grey painted posts and decide ....yes it’s armour grey....I had told both days earlier woodland grey...now have an armour grey roof which is same as windspray...don’t know whether to laugh or cry..more cry actually. Heart was set on woodland grey and dune trims. But I did really like your windspray..so confused now what to do....any help would be appreciated....See MorePainting the kitchen
Comments (28)Thanks everyone for your suggestions. I am amazed at the response! I think we will go ahead and change the benchtops, replace the cooktop with stainless steel, a new rangehood, splashbacks and new door and drawer handles and possibly a new sink and taps. We will consider painting the beam and post and add a modern blind to the window. Then if we are still not happy, maybe we can rethink the painting of the cupboards? Actually, I like the timber, so if these changes work I will be more than happy to leave them as they are. Our floor tiles are relatively new and are throughout the entire downstairs area. Also, the wall paint we know is not the right tone (for the floor tiles) but is in good nick and will be remaining until we are ready to repaint. Rome wasn't built in a day but I will add photos when we start the process and you can follow our progress. Thanks again...See MoreWould these concrete finishes work in our kitchen?
Comments (334)Second attempt was with Windex and same paper towel, which cleaned the two honed surfaces up pretty well. The lighter Raw Concrete seems to have been easier than the Sleek Concrete. And finally, to get rid of that pot scratch I used a non-scratching Scotch brite pad (what we usually use on dishes) with some diluted Soft Scrub. This one took a little more elbow grease but I'm satisfied with the results. My opinion is that comparing the two surfaces (honed vs. glossy) there is a marked difference. That being said, I currently have tile from 1978 and grout lines that are so deep and narrow I have to scrub them out with a toothbrush. I guess it's all a matter of perspective. We decided to go with the Raw Concrete after all, and like others have said, just expect that it'll take a little more work and show a few more stains. But then again, isn't that the whole point of concrete? That it looks industrial? I hope this has helped someone. If anyone is interested I'll try to post some more photos and real life feedback in a couple of weeks once ours is installed....See MoreK H
7 years agoEllen Walsh
7 years agoJo-Anne Ochalla
7 years agoKathleen Picard
6 years ago
Sponsored
Peter Cadoux Architects, P.C.