Both. I know it depends on what you cook and how good your extractor fan is, but I've never had problems with things on shelves getting icky (when I was in a university provided studio flat, my book shelf was about 1 m from the cooker, and it never got greasy in the 3 years I was there), but equally, I wouldn't want everything on shelves, and not everything needs convenient access. It's basically a question of getting storage right for how you use the kitchen.

Painted cabinet doors are generally at the top of the price point, with polyurethane in either gloss, satin or Matt finishes being rather expensive, and hand painted doors even more so. Laminate on the other end of the scale are cheaper, but also only have the option of a flat door. If a profile is what you what, as most if not all painted doors are profiled, ( have a door shape), but the durability of laminate is wanted, then a vinyl door can provide both. Depending on your door provider, try to stick with Australian manufactured vinyl doors to ensure they meet our regulations, such as albedor or tesrol doors, and they will give you best of both worlds. Also, being that they are cheaper than painted timber doors, modern kitchen construction means replacing doors are as easy as clipping off hinges, and ordering new ones!

We have a similar home in a sydney beach suburb. We are in a different position where we have bought ours as a downsized but are just about to restore the old 50s beauty to its former self. We have quotes of around $400000 to gut and change the floor plan which includes 2 bathrooms and a new kitchen and also add internal stairs to the garage and a large deck off the back, lift some ceilings and replace gutters, eaves ect ect ect. Attached are my inspiration boards and what the house looks like now, hopefully in about 4 months I can update you.

Well after a very (very very very) long time my Living Room is all but complete. There is some work to do behind the new steps and some trim to be put on the bookshelves. A light is to be put between the couches (that the electrical cable hanging down) and the wall lights are going to be removed. So just a quick rundown on what has been achieved; Two sky windows - Velux - roofing guy Sheeted under the beams - plasterer New carpet – Bunnings – carpet layer Closed off the old bar and put in a door – builder and plasterer Installed ceiling fans – Hunter, remote control, reversible – electrician Installed downlights - electrician Painted the endwalls – Solver Paint but Dulux Chine White colour - me Painted the ceiling – 2 x coats Solver Ceiling White over 2 x coats plaster board sealer - me New blinds (venetians) and curtains - from Spotlight - me Installed a gas bayonet heater (until I can afford a gas ‘wood’ fire for the fireplace – cripes they are expensive) – secondhand from Garage Sale - me Installed bookshelves – 2 x 202mm high + 2 x 106mm high Billy Bookshelf and 2 x Brimnes Cabinet - me Built and installed new steps and bench top on bookshelf – laminated Beech bench top, cut to size and routed, stained and oiled - me Sofas – Ikea Ektorp - me So some things I would have done differently. The downlights would be warm white not welding mask white. In fact I would re-think the whole light thing and possibly use lights with reflectors that were dark so that light was only reflected down. They would ‘lower’ the ceiling and make the room cosier I think. I kinda like the ceiling fans but had seen some which were awesome but really expensive. Then I saw ones very similar to the awesome ones but much cheaper but by then it was too late. I should have put bi-fold doors where the old bar was instead of a swinging door. I suspect that it will be unlikely now that I can use the room for its intended purpose. In fact with hindsight I coulda shoulda done the job myself rather than getting a builder in. It’s not as good as it should be and that has disappointed me. The bookshelves have come a up a treat – need to finish them off though with some trim. All from ‘Ikea’ except for the timber bench top. The bench top was a light bulb moment and breaks up the all-white appearance of the shelves. Also the white of the shelves and the white of the cabinet were slightly different and the bench has helped disguise that. The bench top and the steps were laminated beech panels from ‘Bunnings’ that I had cut to size. I stained them, put a router over the edge to round it off and then coated with Tung Oil. The bookshelves look bigger in real life than they do in the photos too. So now to sit and enjoy my handy work.