Have you considered dual metal/ceramic handles such as these ? http://guide.alibaba.com/sport/images/shop/79/09/24/0/3-78-inches-ceramic-kitchen-cabinet-handles-pulls-knobs-dresser-pull-drawer-pulls-furniture-handle-knob-hardware-white_632390.jpg The metal can be a variety of types/colours/finishes also as Slavka says Iron (dull would be a great choice coupled with a plain white to pick up the counter top and offset the monotony of the drawer/cupboard fronts.

I ended up going with no handles for the upper cupboards, but handles for the lower cupboards and drawers for the following reasons: - they were mostly hidden from view anyway due to the island bench; - they were quite a bit cheaper than shark nose (i.e. no handles); and - I wasn't overly keen on crumbs and other kitchen mess making its way into the drawers due to the shark nose design. These articles may help: [https://www.houzz.com.au/magazine/is-a-handleless-kitchen-right-for-you-stsetivw-vs~49954976[(https://www.houzz.com.au/magazine/is-a-handleless-kitchen-right-for-you-stsetivw-vs~49954976) [https://www.houzz.com.au/magazine/6-factors-to-consider-when-choosing-handles-for-your-kitchen-cabinets-stsetivw-vs~30734212[(https://www.houzz.com.au/magazine/6-factors-to-consider-when-choosing-handles-for-your-kitchen-cabinets-stsetivw-vs~30734212)

The plumber is correct, the faceplates and handles are connected to the mixer body, so you will need to change the mixer body, - often difficult. this is why we recommend to get good quality mixers when they are in the wall.You might be able to access the tap from behind and avoid damaging tiles?

Hi F2468 If you want an exact match then I suggest that you purchase the style of handles you want and then ask your Kitchen Manufacturer to spray these with Two Pack while they are also painting your cabinetry. I also suggest having some extras done at the same time to help with future proofing. Hope this helps Malcolm.