contact the public relations liaison at the company and they should be able to advise the contact details for the designer or architect who can provide specific information and/or take close up photos in good daylight and ask a paint supplier or paint section at Bunnings or similar for advice

I have only seen one wooden bench top that has managed, over time, to keep the wet out and avoid that black mouldy creepage where the water splashes behind the taps and around tap inserts. It was built by a carpenter and then the owner applied oil to gain the colour desired before applying several coats of marine epoxy (several = at least 5), sanded back before every new layer. It was burn proof and the colour locked in by epoxy coat with no maintenance required (until a visitor put a burning pot on it and left it there while attending to fire on stove, still... only left a black ring. That said, the owner promptly got out the sander and ground back until black ring was no longer charcoal texture, then reapplied oil and layered epoxy until black ring looked like it belonged (can't do that with any other surface I can think of?). After 15 years there is no sight of the insidious black mould from water penetration so I suppose it is the same recipe as with most thing successful projects in life, research, research, preparation, preparation, preparation and don't falter at the finish line.

Hi Will, we have the Taurus and certainly love the look. We installed it late winter last year so it’s only recently that we have really put it through its paces. We have a huge open plan area to heat and this does do the job but needs a constant supply of hardwood to keep it effective. i am a bit disappointed at how quickly it burns through the timber even when turned down. it is absolutely cold by next morning and does not provide warmth overnight. it also billows smoke whenever the door is opened though this eventually lessens as the heat builds and the timber burns more efficiently. The firebox is quite shallow and it’s a challenge at times to stoke the timber safely as on occasions the coals and logs teeter on the front edge and it’s easy for them to fall out. We crafted a steel lip to sit in front as a prevention. And lastly it’s disappointing that no matter how much we try we always end up with blackening on the glass which requires daily cleaning. i’m guessing this is related to the abundance of smoke that seems to remain accumulated when lighting the fire and getting it going over the first hour. And yes, our firewood is excellent quality and dry but i can’t help thinking there needs to be a redesign to allow the smoke to travel up the flu rather than remain in the firebox.

Hi Anne, Your home is beautiful with so much potential. There have been some clever ideas presented but I think its important to have an overall plan that you're working towards. This way you avoid needing to re-do certain areas. With the overall plan you would decide which materials you like and what needs to change and then you can stick to that plan as you roll out the changes. For instance, I think the brick on fireplace wall is a lovely feature of the home but the brick in the kitchen area is competing with it. With the timber panelling, it was certainly a feature of the home originally but these days we tend to paint out the panelling to make spaces feel lighter and more open. We often use Dulux China White when working with robust materials like brick and timber as it has a warm stone like tone. In one of the pictures, I can see that there is a full feature brick wall in another room which should creates a lovely flow and consistency. This is a home in Fairhaven Victoria that looked just like yours (but without the brick) and was painted in the China White. Cheers, Vikki. Your bathroom will also looks great with a touch of paint and a new vanity.