Oh C'mon V Richards...every epoch has its treasures. B4 you make a mad run for it stop a while and consider the period and the reasons for the style...it can be extremely enlightening....unless its not the period you want to escape from but from some of the opinions. I spent many years of my youth outside of Australia living surrounded by old ruins in Europe. I forgot what it was like here. When finally I returned to Australia and found myself living in some of the 60s and 70s places..I found much to admire and wonder about. I may not have fallen in love with much of it but there was a certain mistique and a feel that I can still conjure when talking about certain places. Not saying that it was all romantic and pleasant but it conveyed something of the era and the kind of Aussie from those days.

Thanks to nickybaruch I am now considering doing the floor (which is now sanded back ready for finishing off) with white liming with a slight tint colour in it. Some say you have to be very careful when liming. Is this a problem? I would have thought it would be just like putting on a stain? Anyway doing it that way we would still see the grain of the timber floor which would be lighter than the dark cedar it was before and keeping the pine lined ceiling with the cedar coloured beams will blend in well I think with the lighter timber floor and the white walls we now have. What do you think?

i was once told that "any wood matches any other wood" and that's helped me live happily with mismatched timbers for many years..of course it's probably possible to sand and stain the floor (ask a laminate timber floor supplier) but it'll be a tedious waste of sweat and tears for an uncertain result..what about make sure the walls, ceiling, architraves and skirting boards all look great and don't worry about under the hearth if it's not being moved, maybe add a matching trim around the hearth and plan a new floor for "later"

I have only seen one wooden bench top that has managed, over time, to keep the wet out and avoid that black mouldy creepage where the water splashes behind the taps and around tap inserts. It was built by a carpenter and then the owner applied oil to gain the colour desired before applying several coats of marine epoxy (several = at least 5), sanded back before every new layer. It was burn proof and the colour locked in by epoxy coat with no maintenance required (until a visitor put a burning pot on it and left it there while attending to fire on stove, still... only left a black ring. That said, the owner promptly got out the sander and ground back until black ring was no longer charcoal texture, then reapplied oil and layered epoxy until black ring looked like it belonged (can't do that with any other surface I can think of?). After 15 years there is no sight of the insidious black mould from water penetration so I suppose it is the same recipe as with most thing successful projects in life, research, research, preparation, preparation, preparation and don't falter at the finish line.