Hi Tina, thanks for posting, it is all looking great. Shame about the panelling, but sometimes these things happen for a reason. It is great the armoire matches the doors so well when they are all on one wall, but I don't think you need to have the bed and side tables matching, especially when they are on another wall. My issue with painting furniture, while I love it, is the maintenance. It does chip over time and becomes one more thing to paint. I don't know what the timber is in your furniture but another possible option, especially to give you the coastal vibe is to lime it. To do this successfully, you will need to sand all the existing stain off it and go back to the raw timber. The darker the original timber, the less limed look you will get so bear that in mind too. I did an old bunk bed up that had seen better days, for my grands bedroom. It was a dark red wood, but with 4 coats of stain I got the look I was after which was that driftwood/coastal look. The whole thing looks totally new again. Sorry I can't post a photo as this function no longer works for me. Have a look at the Feast Watson range of liming stains, they have some gorgeous soft colours as well, but they let the timber show through rather than having the solid painted look. It is a very easy product to use, it dries quickly - I did the 4 coats over 2 days effortlessly. The hard work is in the sanding.

grey and white always look good but Google "choosing colour schemes" for all the different paint companies services for matching colour schemes

DB.....A LOT of ideas and advice flying around here.......skimming through I see you are endeavouring to establish a basic concept for a designer/architect to consolidate for you, which is great.......whilst you may think this is a logical approach to achieve the best outcome, you are arguably just throwing around random ideas rather than properly resolving/focusing on the critical aspects ........my advice is do this: firstly clearly ascertain two things on paper, not in plan or building format but in writing...that is 1. List all your requirements/needs/goals and 2. Nominate a budget. Next, identify/research a logical local designer/architect option and approach them with this information....A designer's job is to come up with an appropriate concept/solution that best balances your requirements, aligned with a budget and of course make it viable within context/site. Sure, you want a cost effective/modest result, that's fine, and that will influence the solution, but as a general comment it feels like there is massive potential being missed considering the site..it dens;t necessarily have to be that big or fancy, but you have to put the EXPERIENCE of the home front and centre of the process, and not just think of it as a kitchen or whatever laid out this way or that ....This is about an amazing site and the living experience of that and the design should be based on this and bring together your specific requirements elegantly balanced in context......The issue I have scrolling through all this is that you have all these almost disconnected ideas of building form, but you have this incredible site....... the process of resolving the spaces ideally needs to develop from cues of the immediate environment/site in order to make the most of it since you are pursuing a customised solution.....agree with MB, every project has a budget and ultimately from experience this is in general the ultimate/overriding constraint. This project could be anything upwards from $500K and it will come down to the working out how far you want to take it, and what your priorities are over various levels.......this one has seriously significant potential -make sure you make the most of it as you're truly fortunately to have this opportunity to build a home for you and your family to enjoy there.......best of luck :) PD

Bump!