Hi Joaney & Lainy I also use only windex on all my bench tops. The granite I had before was a white with a few burgundy streaks and gorgeous highlights through it. Can't remember the name, might have been River White but not sure and I found nothing stained it at all. The marble in my bathrooms I have now look very expensive and impressive but I know every single mark on them even though a visitor mightn't pick them out. In my kitchen I now have Caeser stone and if you want a virtually indestructible bench top this would be it. I have blackbutt timber floors and as they have a lot of color, I chose all white in the kitchen with just a tiny fleck. I just love granite because of the beautiful grains you get running through it.

I have only seen one wooden bench top that has managed, over time, to keep the wet out and avoid that black mouldy creepage where the water splashes behind the taps and around tap inserts. It was built by a carpenter and then the owner applied oil to gain the colour desired before applying several coats of marine epoxy (several = at least 5), sanded back before every new layer. It was burn proof and the colour locked in by epoxy coat with no maintenance required (until a visitor put a burning pot on it and left it there while attending to fire on stove, still... only left a black ring. That said, the owner promptly got out the sander and ground back until black ring was no longer charcoal texture, then reapplied oil and layered epoxy until black ring looked like it belonged (can't do that with any other surface I can think of?). After 15 years there is no sight of the insidious black mould from water penetration so I suppose it is the same recipe as with most thing successful projects in life, research, research, preparation, preparation, preparation and don't falter at the finish line.

Ceasarstone recommend that you do not use their products as a splashback behind a gas stovetop unless you have a 200mm gap between the edge of the stovetop and the splashback due to the heat. If you change to an electric or induction cooktop then this distance can be reduced to only 50mm. If you are using a stone-look benchtop, such as the ones that you have mentioned, I would NOT go for a stone look printed on glass for the splashback as the reflectivity is higher with the glass and it will look fake. I would suggest tiles or a glass splashback that is a consistant colour, possibly matched to the veining of the grey in your benchtop which will complement your benchtop (which is the feature of your kitchen), and not distract from it. Matt black tapware and sinks are very on-trend, and when the fashion passes in about 18 months they will start to look dated. Classic chrome and stainless steel is timeless, so your choice really depends on how long until you put your house on the market... Best of luck with your kitchen, Dr Retro of Dr Retro House Calls http://www.caesarstone.com.au/Portals/0/Documents/2017-Kitchen-Splashback-Guide_Web.pdf

Hello dear, I believe it is to choose and arrange colors to match existing furnishings, or possibly in some cases to even choose furnishings as well to give a certain 'look' to a room or rooms. But, an interior designer is someone who plans, researchers, coordinates, and manages such projects. An interior designer evaluates and designs interior living and work spaces to make them functional, appealing and well-suited to an owner's needs. Interior designers make interior spaces functional, safe, and beautiful by determining space requirements and selecting decorative items, such as colors, lighting, and materials. Recently I have done interior design in my office from HTS Interior Design LLC, who offers an interior solution to meet specific needs from concept design to turnkey Fit Out solution.