Kitchen size would dictate, but I find shelving, provided it is not too deep, is more accessible than sliding units. I also live with people who don't know how to close things.

Rellish, did you have trouble getting matching grout and silicone? We're about to use the exact same tile in our bathroom. Also, did the tiler have any trouble due to the embossed pattern? Our builder thinks we need to install the tiles on top of the vanity as the tiles are not flat and it will be difficult to get a good, clean seal if the wall is tiled first.

Hi Narella, most manufacturers of induction cooktops such as say Miele and Smeg make their 600mm wide units around 500mm to 505mm deep (front to back) where these fit comfortably into a 600mm deep cabinet, while still allowing for all the clearances, overhangs and venting required. You may like to check with your cabinet maker but as far as I am aware NEFF make their induction cooktops much deeper; making these 546mm deep instead of 500mm. This means that your cabinets also need to be deeper than the "normal" once all the required clearances are taken into account. I am not sure what you mean when you say this will not work with the rest of your cabinets. If you are positioning your NEFF cooktop above your underbench oven as it is shown in your original photo; then it appears that your cabinet maker has again done the right thing and has actually made all your adjacent cabinets the same depth; whereby preserving these clean modernist lines of your kitchen. Regards, Malcolm.

As mentioned a couple of photos would help. I would go with stainless to match the appliances etc, leaving the gold for the light fittings good luck, cheers