The bricks are a nice idea but probably not suited to the slate. I would possibly add a pendant light or 2....maybe wire caged over your dining and a white bookshelf to the wall of the kitchen. Does it currently have a blackboard on it? Anyway I would add a white bookshelf and add stacks of bowls and cookbooks and some decorative personalised elements. This will add some depth and a refined industrial feel but not be too heavy in relation to your slate.

What about these, haephestus? http://www.bunnings.com.au/mimosa-fresco-corner-sofa-setting_p3240550 http://www.bunnings.com.au/mimosa-5-piece-deep-seat-lounge-setting-with-cushions_p3240551 http://www.kmart.com.au/product/3-piece-wooden-table-and-bench-set/702865 http://www.kmart.com.au/product/oasis-bench-seat-with-planter-boxes/702875

My Home Stylist - I really appreciate your feedback. The Noguchi coffee is really nice. I think I'm getting closer to finalising the colours. I've done my research and found these. Do you think they match? Coffee table I did my research and found something similar to the noguchi coffee table but in white (thought it'll suit the white ikea table). It's aFreedom's Stockholm table . Dining Chairs I really love the chairs with timber legs but I've decided that since my apartment will be occasionally rented out I'll stick with a more conservative look. Dark Grey frabic will match my sofa. The steel........ It's similar to one of the photos on houzz. Bar Stool: Now that I have chosen a dark grey/steel leg dining chairs and an oak based coffee table, would a standard white barstool with steel leg still work well with everything else or is it starting to clash? I found some possible but more expensive options if it's starting to clash:

Hi new to all this but thought I'd pass on some fan tips; Be very selective of the shape of the fan blades. They all look stylish but in my experience the flatter the blade the less air they move. We have now gone back to the original metal fans with the blades that bend at the edge, http://regencyfan.com/industrial, our fans are more stylish than the one shown (the blade shape is nice and clear in this example). Our weather in no where near as warm as yours I'd hate for you to make the same mistake we made, twice, before we learnt. Look at the fans motor size, some of the expensive and lots of the cheap ones have small motors that don't last long, unfortunately price does not dictate quality in this case so don't get caught out. My husband is a mechanic and this is one of his "things" when every we shop for electrical items (drills, fans, pumps etc.) always make sure the motor is quality and large enough to do the job and last. How may speeds. We have 8 fans in our home, one is in our extension and was purchased at a different time; It's low speed is realllllllly slow the next one is so fast it's like a cyclone and I'm not game to try the third one in case it dismounts from the ceiling. Be careful not to mount fans too close to down lights or you get a flickering effect caused by the blade passing over the light. Try not to mount the fan directly over the dining table as it will cause food to go cold. I'm with mydesignobsession when it comes to style/look I prefer visitors see my wonderful eclectic decoration then my ceiling fans! Good luck