Hi , I did a major repaint of my kitchen when I moved in last year (this is the second time I've done this in a home). From salmon pink doors and tiles with plastic pink handles, it has transformed into quite a lovely kitchen with crisp white benchtops and doors, retro aqua blue splashback tiles and chrome hardware. I didn't paint the floor tiles because it is not a good idea, it won't last. And I think in your case, the kitchen floor will not look as bad when you take care of the cabinetry and countertops (and appliances - don't forget the sink, this made a huge difference to my kitchen which had a horrible stained "white" fibreglass sink and plain tap). The only regret I have is that I was convinced instore by a staff member to use water-based enamel on the countertops and this was not a good idea as it marks and stains at a feather's touch and I am always scrubbing it with magic erasers to bring it back to white. Just use oil-based enamel, preferably gloss, and it will clean up beautifully. It will just yellow in about 5 years' time, which isn't an issue if you're not using crisp white like me. Step 1: remove all handles etc. and sand back the melamine/formica surfaces and vacuum up all dust. Wipe down all surfaces with methylated spirits to remove any other dirt and - especially - oils. Step 2: Undercoat all surfaces with White Knight Grip Lock Primer (keep this stuff on hand, it is magic and can be used for a million things). Give it two coats preferably. Step 3: Paint doors and cabinetry with a good quality high gloss acryclic. You can use oil-based enamel too, but it's easier to work with acrylic. It doesn't really scratch unless the cat tries to jump up above the cabinets and claw its way back down when it misses - in other words, don't run knives or screwdrivers down the doors and they'll be good. If it scratches, get a small artists brush and touch up with your leftover paint in the tins. It takes two seconds and is as easy as to do. Step 4: paint the countertops with an oil-based enamel. Clean up with turps. Do two coats and use a good quality brush. Give it a good few days to dry, a week is good if you have the time as it hardens in this time and becomes very strong - so put your camping gear and laundry sink to good use during this time! Step 5: put on new handles and hardware, install new sink and appliances and enjoy the makeover. For the tile splashback, follow the same steps, making sure you give them a good sand. You can use gloss acrylic here too. It will scratch if you knock it with a sharp object, but again, keep the touch up paints and a small artists brush handy. In your case, because the splashback doesn't go all the way up, I'd also consider chiselling the tiles out out and using a panelled splashback from somewhere like Ikea or Bunnings or a store that orders Laminex panels. They can be pretty cheap, and although not perfectly beautiful are a lot more attractive than those tiles. If you can save the tiles (the tile glue is probably old and brittle) and sell them, someone will love them on ebay! And even re-tiling with some cheap/chuck out tiles isn't difficult or expensive in that space if you are at all handy. Splashbacks in burnt orange or red would blend with the cream and floors. Other alternatives for the countertop (particularly if you don't want to patch up the gaps from the older, larger stovetops and sink) is to put in an Ikea or Bunnings (or similar) cheaper benchtop. I have also tiled a benchtop before and this worked really well with the added benefit of being able to put hot pots straight onto the benchtop. Don't use low end wall tiles. Use a stronger tile so they don't crack. Again, with your oh so brown floors, if you stick to lighter colours for the cabinetry (eg. antique white or cream) and a more sandstone-ish colour for the benchtops (or match the cabinet colour to the benchtop so you don't have to paint it and set off with the coloured splashback), the floors won't look as bad. Also, you can put a floor runner along the length of the kitchen hallway (in front of the oven/fridge area) if everyone in the house is generally steady on their feet and don't tend to trip over everything and this will break up the brown beautifully and you will barely notice the tiles. All in all, it cost me about $200 for the paint and equipment plus handles, sink and big shower tap, but it has meant that I am delaying my kitchen reno for a number of years, as I really like the kitchen now and everyone comments on how great it looks. None of this is hard to do. As a female, I have no problems doing all this myself as long as I have the time from work. But my father was a painter for 40 years, so that's why I can get the scoop on the best paints etc. to use on these projects. Good luck! PS: Don't let anyone tell you to whack some fancy paint on the doors and it will be done in a jiffy - it will peel off. Sand and grip lock prime - this is essential if you want it to look good longer than a couple of months.

Hi there Not at all, I liked that your sister had a good idea, but can see where you are coming from. Bunnings has had a fairly recent addition to their bathroom vanities, lovely wall hung with drawer and gorgeous slim benchtop. You mentioned that there was a cupboard behind the opened bathroom door, could that be updated for linen storage. In this current layout, the shower is run towards the door with the shower and taps on the outside wall, this helps to direct water away from your large sash window. The shower would be narrow across and longer on the left wall. The whole bathroom floor tiled the same and where I have a short wall that could be a glass screen? I have added a 400 wide full height linen cabinet but if you were to use the other cabinet for bathroom storage you could certainly have a longer vanity with either one or two drawers. This with the mirrored shaving cabinets should give you lots of extra space cheers

Your renovations are well underway, so after seeing the small floor plan and that the vanity is on an internal wall and you apparently still want the Shaving Cabinet. Having cavity brick walls I would get your brickie to remove a section of the brick wall so that the shaving cabinet can be recessed back into the cavity, this will overcome any concerns you have about bumping your head, this opening can then be patched along with other walls. I would take all of your photos and measurements to someone like Reece to pick a hand basin to fit,, I would also keep in mind that if say the width of the vanity is around 900 the shaving cabinet would match that width and you would end up with say 2 x 450 mirrored doors, which puts the mirror join in the middle and in your face when using the vanity. cheers

Vessel basins have a lot more styles and sizes to choose from which can help with providing more/less bench space depending on your preference. They also wont take up as much space in the vanity. You may need to do a little more cleaning than if you went a standard integrated style.