could you get fabric with the wallpaper pattern ? sometimes the wallpaper company has the match ? if so do one cushion to go with one of the grey ones, otherwise, I would try and match one grey with one of the other colour in the wallpaper. 2 cushions is enough for the size of the bench. Try another arrangement for the rug, put it right to the door (it is not big enough for central use in that space) , move the table to the back near the wallpapered wall, add an armchair (like a bergere) beside it. Nothing on the left of the entrance wall, what is there is the wrong scale and too high . I would also try a long circular tablecloth in an off-white on the table, it would give substance to the arrangement. I love your wallpaper, but I think the other walls would benefit with a darker tone imitating the wallpaper background colour. It is almost there keep going.

Miranda You appear to be making all the right choices in life. I will be a little bit presumptuous by offering some advice on helping you to raise your child in touch with nature in this age full of all the electronic lures that keep the kids indoors. or, when outdoors, glued to a small screen, rather than the glory that surrounds them. I am writing a book about landscape architecture and have a section regarding the importance of embracing nature in the preschool years. - which I would like to forward that section to you. However, my computer skills are limited to email and US Mail. I don't even know how to attach a picture to the text. If you would like to receive this draft from my future book, send me your email or postal address, and I'll get it right off to you. My email is cascio.offsite@gmail.com Good luck with your new challenges and opportunities. Joe Cascio

Bravo to all these amazing creative minds. I hate wasting stuff that still has life in it. By the way, though I have read that some pallets are treated with a fumigant which is toxic. Generally, make sure pallets are stamped with “HT”, which means they haven’t been exposed to chemicals (at least not in the treating process.) Avoid unmarked pallets or those with “MB” for methyl bromide. Well, if anyone wants some really nice, bargain 2nd hand windows we just pulled out of our 12 y-o house to make way for a sliding door, and you live around Melbourne Australia, please check them out here: http://www.ebay.com.au/itm/112070272414?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649

Hi Brett, first off - well done for reaching out (without ego) and asking those that know and those that have tried and found results. If you are going with the brick veneer, the cavity is key to your moisture and thermal capabilities, after years within the house. Gyproc is not designed for anything but a 'skin'. If you increase thermal layer on the walls by asking he outer layer of the stud work with good quality silver sarking or Tyvek. Tape joints to eliminate vapour transfer to internal gyproc. Use 12.5mm gyproc on all external walls. OR Use 12.5 silver backed gyproc board on walls instead of previous. If coast effective -I would use this on the ceilings also. Principle being - isolate the internal breathing environment both thermally and other from the externals. Then deal with any ventilation or thermal issue by themselves internally. Look at why a house is designed, then go 100% better. The problem with roof voids is cold at night and heat in day, focus on high air barrier and high 'R' values here. Internally, consider + and -, as in, where it is cold-draw heat to it (South+ low) where it is hot, draw coolth to it (North & high). The result will be both continuos balance or equilibrium in comfort, thermally, energy and ventilation wise... Hope this helps : )