Post a pic of the painted room.... What colour extension table are you interested in what type of style Just noticed your couches are are dark brown and the dark floor closes up your space A bit hard to suggest chairs as I can't see what theme or style your house is to match what theme are you looking to achieve I would prob by a white gloss table and have either off chairs or light grey fabric chairs and buy a light grey couch Not sure of your budget but The brown couch you already have makes your place feel small and clashes with your floorboards My suggestion would be to get a new couch and dining table to match would make that space feel revived and fresh it's hard to match a table to that space with that brown couch

Indeed an interesting thread an I must admit that I've been going cross-eyed extracting as much information from your two images as I can. A very challenging dilemma. I can't speak for the glazing. It's not my area of expertise. I'm inclined to agree with other comments in this thread re leaning towards internal window treatments. The long raking window at top presents special challenges and as Envirotecture has indicated it would meaning being open to the consideration of framing your view somewhat. Here are some ideas which might be worth considering. 1. A fixed curtain for the upper raking window. Given the room is very much about light, a sheer, though not providing the same insulating properties as curtains or heavier drapery, would nevertheless, provide some insulating benefit from the air-gapping effect. A fixed curtain (sheer or otherwise) is likely to be one of the cheaper components in the options I'm listing. 2. It's hard to tell from the images how much more the 'conventional' rectangular space beyond the couch extends. Assuming it does not extend the entire length of the side of the house you have a number of options available to you here. Options which could Include Soft Roman Blinds fronting on sunscreen roller blinds. Pelmets would provide substantive insulating benefits, but it is difficult to see from the image whether they would suit, and whether you would have sufficient height, or 'any height' above that window in which to mount them so as to minimise the loss of window view due to the stacking up of the Roman. The sunscreen rollers are less problematic in that regard and provide some insulation while still allowing light when the Romans are not lowered. If opting at any stage for Romans, ensure they are properly lined with pre-stiffened Roman Lining which provides better insulation, but almost more importantly, will not sag over time such is the case with many Romans that are lined with much cheaper curtain lining which is not pre-stiffened and does not afford the same degree of insulation. 3. Along the main alfresco expanse where the table is located, and under the previously proposed location of the fixed curtains along the raking window, a motorised or hand traversed S-Fold or Wave curtain fronting, yet again, more thermal sunscreen roller-blinds could present an attractive modern look in keeping with the modern style of the room and house. Of course, an issue is going to be stack-back when the curtains are open, however, the double layered protection of both a Wave or S-Fold curtain and Roller Blinds will provide superior insulating benefits to tinting throughout the year (not just summer) imho. 4. Other ideas include Plantation Shutters across the raking/eve window above. I doubt very much that plantation shutters would work along the lower 'framed' area as the stack-back effect if bi-fold, or loss of view if sliding, would be too much of a sacrifice, let alone the additional consideration of the cost of such treatment used so extensively. Although, the window treatments i have suggested for possible consideration do not necessarily offer optimum insulation (eg the exclusion of pelmets or use of heavy lined drapery), I believe that you there would be some offset in terms of a positive ROI over time due to the savings you will reap on your heating/cooling bills. I'm in Melbourne which is marginally warmer, and without adequate insulating window treatments, the heat loss through the glass is substantial and the heating/cooling bills frightening. 5. That's a hell of a lot of glass to treat whether you opt for a glazing solution which will provide primary benefit during the summer or conventional internal window treatments - whether drapery or blind. Either way the solution is likely to be costly. To keep the cost down you could always consider high quality Thermal Verticals which can come in a variety of slat sizes colours and textures and provide substantive savings over the Wave or S-fold solutions with less stack-back loss. Once again ensuring you purchase high quality verticals that will hold up to the Australian sun over the long haul is important. The cheaper stuff might look good but you'll be picking slats off the floor within 5 years if you are not careful. Here is an image from one of our own projects where high quality 'chain-less' verticals were used to cover large expanses of glass throughout the house in combination with thermal roller blinds. Of course, this treatment or the use of Wave/S-fold curtains would only provide part of the overall solution you require. 6. The only solution I didn't yet mention is the use of folding arm awnings. While they would provide benefits during the summer, they would be more than likely at the expense of your expansive view (or part thereof). Quality awnings whether manually operated or motorised are also costly. The only other comment I might make is that internal blind and curtain window treatments provide you with a high degree of flexibility. Romans, for example work well in combination with many other window treatments, either along side them, or in combination with each other in the context of the same window. The same can be said for the other treatments I have mentioned. The internal window treatments suggested can also facilitate the ability to support a style transition from one room or area to the next. - An important consideration if the house is of a uniform style throughout and you are wanting to 'mix it up a bit' or transition to styles that vary yet compliment the primary style or look you may have throughout the house. I'm sorry, it is difficult offering suggestions based on your two images, even though they are of good quality and detailed. I don't envy you with this 'design dilemma' ... though it certainly gets my vote as one of the more challenging ones I have seen in recent times, and in an area/topic where I felt I could contribute.

bigreader I'm okie..thanks for caring ..just need time to readjust kind of walked out on my job..so looking for stuff to fill in my time ..I hate being bored and sitting sround fiddling my thumb been looking for courses to do and taking my camera out.. these I took yesterday in Warrandyte..

Unfortunately there is no simple answer for the best dining table for your home as so much depends on your household, lifestyle, and dimensions of the available space. You need to think about who uses it, and how you entertain. If you have messy toddlers get something that is easy to keep clean, and is fairly robust. If you like to host large number of people for dinner maybe a table that can be extended. What is the size of your household? Do you usually eat at the breakfast bar? For materials and colours I would be looking at what you already have in your kitchen and family room as a starting point. Don't introduce new colours or new materials to the dining area that aren't already in the kitchen or family room. Your bar stools look good and work well with your kitchen. If you are happy with your bar stools I would use them as a starting point to see if you can source complementary dining chairs. Once you have sourced your dining chairs find a table that works with the chairs. Make sure that the dining chairs that you select are the right height for the table, and if you get dining chairs with arms (called carver chairs) that the arms fit under the table. The tops of tables are a fairly consistant height, but the clearance under the table depends on the materials, structure and the position of the table legs. The number of chairs that you can fit around a table will depend on the position of the table legs and the width of the dining chairs. Measure your available space carefully before looking at tables to ensure that you have adequate circulation space around the dining setting to access the external door. Make sure that there is enough room to get past a chair when somebody is sitting at it. Without knowing your household, or lifestyle, or the dimensions of the room I think a six person or possibly an eight person circular table would work well in the space, but this may not meet your needs (or fit). Best of luck with finding the best dining table, Dr Retro