Emily, with being a renter, I'd definitely check Pinterest for temporary solutions. I've seen DIYs where you can starch fabric to walls with an iron. Also try temporary wall paper/decals, but I'd test a small area first. Cabinet makers or even yourself would be able to create a flush vanity without attaching it to the wall. Plywood, especially hoop pine, has received a lot of traction. It really gives a clean, organic look that you could have custom cut to fit in the area. You could also use it on the wall – it could be stained, left natural, or painted for a feature. Have a look at EchoPanel. It is a decorative, acoustic pinboard that would add a splash of color/design. If it is above your vanity, you could pin pictures, inspirations, etc.

Firstly...are you sure they are jarrah and not som other more exotic timber? If you are fortunate enough to have a genuine 1932 built cottage I say "Don't Do it!" Just look at the beautiful timber in that floor! It would be sinful to paint it. I have a 1924 cottage with beautiful hoop pine floorboards all from the day it was built. My suggestion is to have the boards sanded and polished. I would not even dare go near them with polyurethane. I have turned back the clock and used the methods of the period of the house...a mix of pale boiled linseed oil and kero. Put it on with a mop or a deck mop or a wool mop leave it soak in. Re-do and leave it soak in,,,( you won't get patches...the floors will just soak it up.) Third coat, add a bit of turps to the mix as a white ant deterrent. Then, when the floors look like they've soaked up enough, get a big old fashioned string mop...if you can find one...or use a deck scrubber and old towels...or even a wad of new ones...100% cotton...its worth it, and rub off as much of the surplus as possible...wear sox so you will notice when the sox do not get oil stained anymore. First go is a long process but you will be really pleased when the floors have had several "drinks". After that you could get just an ordinary floor varnish or oil or just a sealant. Some of the modern wood treatments are really good. Then, every so often do the boards over with your "Oil Mop". You will never find timber like that again and, in my experience, it adds to the value of the house big time. Do what you like to any gyprock and plastered walls but PLEASE love your floorboards and any natural timber...especially from that era. I've been in this old cottage for 32 years. Everyone wants to know where I sourced the "new" floorboards", and who did I get to make my silky oak windows! Hope that helps.

When I started doing reno's, that was one of the first things I wanted to replace but the cheapest quote I could find was a touch under $3000 and that was from some random guy from Gumtree that I could barely understand. Everyone else looked upwards of $4000 and that's just for installing the new gyprock ceiling. I had plenty of other things that I needed to do the place, so I quickly ruled that one out. But now after living there, I don't even see the vermiculite anymore. I'll just try and work around it. My thoughts now are to... 1) Remove the ceiling fan. Get a pendant light (either 2, 3 or 4 from my very first photo). Keep the bar light. 2) Replace the existing fan with something more modern. Replace the oyster light with an understated ceiling mount fixture, or just keep the oyster.

I first had cold drip coffee a couple of years ago in Japan before I even knew that's what I was having! I wondered why there was a clear sugar syrup at the table in the cafe until I ordered iced coffee (naively expecting a milky concoction as here in Aus) & received my black cold drip over ice - also made from coffee. Going with the flow, I was really taken with the smooth, non bitter flavour & was hooked from the get-go. So yes, I would love to receive one of these as a gift. I've been making my own cold drip with my french press but that little maker there looks stunning. The syrup, of course, was to stir into these coffees where granulated sugar wouldn't dissolve properly.