Agree all glass is ideal, but this is a great option and keeping the budget down. we are about to do ours the same - in brissy too.

Kerrie, I live in Victoria and my pool in completely internal, that is to say it is part of the house and not an addition to the house. I planned to have an external door with the required regulation lock height and seld closing mechanism. Hubby was dead against this door and so I agreed to have a window instead, not long after, we found out that the laws had changed and you are no longer permitted to access to an indoor pool from the outside, so it was just sheer luck that we changed the door to a window. Further, when we purchased the awning windows (2) with regulation restricted 10cm windouts, our building inspector tried to tell us that the windows weren't allowed and that they would have to remain shut and we were also going to have to concrete "bars" into the brickwork on the outside. I argued that regulation pool fences had the same 10cm restriction and after contacting the Victorian Building Commission, I have confirmation in writing, that the windows are deemed to be adequately safe and the inspector has accepted the finding. My access to our pool now, is only from the inside of the home obviously and if that becomes illegal, then we'll just have to sit and look at the pool longingly through the window, as there won't be any access at all ha-ha I'm not advocating that people argue with regulations but if I hadn't investigated my options further, who knows where I would be, having spent $1,500 on these two windows with laminated glass and how beautiful would my brickwork have looked with prisson bars attached. Cheers, Barbara

horizontal anything is a no, the gap would have to be so small it might as well be solid. yes the vertical cable might pass but you are not allowed to be able to squeeze them together as then the gap distance is non complying, The safest one is the solid section PCA pool fence, or glass, or solid, to 1200 mm in Queensland, no greater than 100 mm off ground, and gaps not able to be manipulated, and to stop that you have to have horizontal section in the cable type, which then do not comply, cut metal screens if complying is OK. I would question the void, and if you know the reason for the void, than solutions will be able to be worked out, now we are asking why? Pools in adjoining yards are acceptable with pool fencing complying on both sides, no void is required. so the void sound a bit iffy, unless it is something to do with storm water, or a building requirement, so ask the question why. Pool fencing can be awesome.

your architect or designer should be able to provide 3D images showing the specific line of site from anywhere around the new house from any level and also be able to add different height fences and screens to identify best location for privacy screening.. would also love to see your plans to better understand the problem