The next time I decorate by a colour of the year will be the first time. Don't hold your breath. I have nothing against this particular colour but it doesn't work with all the things I've collected over the years, and I am not about to discard carpets bought after hard bargaining with dubious merchants in Istanbul or Islamabad because they don't "go" with a paint colour that someone voted "colour of the year." In its place, I think the colour would be quite nice (better than this years choices, certainly). It's just that my place isn't the right place for it.

I think you will find that a thick acrylic would be sourceable and more affordable

It's not a simple debate between what you want/need more or less....understand that this a regulatory thing.........if you are dealing with a building permit then it's pretty cut & dry - as the BCA reads, a separate trough is technically required to consitute a laundry....happy to be corrected in my interpretation in this regard but we have had to deal with this exact issue on a few occasions....... But if you are doing just an under the radar laundry reno/refit (no permit) then potentially you can get away with none, but you'll of course need to practically connect the washer into the drainage somehow, which still requires an isolated trap set-up, that technically will be illegal. No you can't just connect straight into a sewer waste as if the connection fails and their is no water trap it would be hazardous (not to mention unpleasant) to have exposed sewer gas. If it's in a kitchen an can connect a washer to a sink waste (similar) to the dishwasher) then arguably that could be passed. The easiest way is to fit a small trough next to the washer that even if you develop a cover for so you can use the area as bench space. It then keeps flexibility and everything above board/compliant for future resale.....

Hi oklouise The sad part is the existing bathroom is beautifully finished! This whole house was well finished and really well built. It was sad to have to demolish things that were so well done, but the design problems made changes necessary. The bathroom has porcelain wall tiles floor to ceiling on all walls and a white polished porcelain floor (slippery as all hell, and a mongrel to keep the grout lines clean!) is laid over a full 300mm+ of solid concrete, under which are all the drains. Outer walls are 200mm of reinforced solid concrete. Tiles on internal walls are over cypress timber frame with generally two layers of lining glued, screwed and nailed on - and there is way more timber in the frame than necessary. I think the builder (who built it for himself) thought the house would last forever and would never need to be changed in any way. Exact distance from external door to wall is 1.1m on both vanity and shower side. The door combination is 1200 wide and placed dead center. It's worth noting that 300m on the vanity side of the door is full-length frosted glass panel and it's possible to infringe a bit on that area if absolutely necessary, provided there's enough room for the door to swing safely (as it swings toward the vanity. I will take some photos now and share.