just put over a km of spotted gum decking into our new house near the beach. Architect and builder recommended and used Cutek oil. The oil seeps deep into the timber without putting a coat on the surface with will peel or fail. Would definitely not use any product that puts coat on the top of the timber. I have used other finishes on our decking at our main house (Cabots, inter grain etc) and all ended up looking terrible after being punished by the harsh Queensland sun. My advise is research your choice thoroughly, as undoing a mistake is very time-consuming and costly. I guess only time will tell if I got it right this time?? Photos below.

We think the timber in your space works really well - we especially like the feature tiles on you kitchen splashback which balances the timbers you have chosen.

You have done extremely well! I think the couches and white rectangular coffee table are great. The things that worry me are the 2 small round tables, the 2 occasional chairs you have now, (though I can see they are lovely chairs, but at different heights and styles that causes a distraction), plus the nest of tables as they don't go with you lovely rectangular coffee table between the couches and the placement of them. I feel there maybe just too many small tables in that immediate area. Looking at the style of the nest and the taller round table, maybe if you stripped back the tops of the nest of tables and painted the legs white so that they match up the other round table they would work together, but remove the small round cane table in the background. I do like the taller occasional chair more than the low one and would try to find one similar. The low chair might be good in a bedroom. To have a higher back chair especially as we get older can be a good thing for guests that drop in and when you are needing to get up and down quickly as the hostess, (good for our backs and our take off). I think introducing cane though it is light weight and that is a good thing, might just be adding too many textures if you want a calm plantation style room. It would have to be a fine cane, maybe featuring the wove rattan sides. Taking another look at the chairs they are both nice chairs but I think you need 2 of the same style. I like the fabric that features the muted lime and black and linen look in the cushions, just that small use of it as a complementary fabric is great. I am wondering if you are able to raise up the palm so it is higher, and used as a more decorative element. I am wondering where your couches came from and the mirror too, if you can remember. Thanks and I hope you find these suggestions helpful, Good Luck

I had some clients that had this colorbond wrap over their timber fascias, which was a similar style to yours and they were very unhappy with the end result. Judging from the age of your home the existing fascia is probabaly a rough sawn oregon timber which has its own character. As timber can be readily trimmed, filled and sanded, the junctions between pieces, and at corners can be easily disguised to give the impression that they are continuous lengths. The problem with the colorbond material is the lengths are limited, and that the joints cannot be readily disguised. In my clients house the installers overlapped the colorbond wrap, and joined the overlapped part with metal rivets. In their case the joint happened directly over the front door and is really obvious. So before you sign a contract to wrap your existing fascia in colorbond there are a few questions you should ask: 1) Do you repair/replace any rotting timber before wrapping? Or is the rot just concealed? 2) What is the maximim length of colourbond fascia that can be supplied, and how is it jointed? Where will these joints occur? Are the joints weatherproof to windblown rain? 3) How is the colorbond fascia jointed at corners, and finished at the ends of the run? The colorbond finish is flat and smooth, so the existing character of the rough sawn oregon fascias will be lost forever. With the eaves, concealed gutters and timber fascias of your home being such an important element to the style of the home I would be considering spending my money on the maintenance and upkeep to preserve the existing character. At least ask your installer to supply addresses of some previous jobs so that you can see how the joints and corners are treated.