yep, stunning. I been drawing something similar for a while and it's awesome to see your ab fab results after your OP. I got interested in some ikea solid timber benchtops, not nearly as nice as yours, and thought I'd combo them with black cabinets, white stone and white walls (just a "what if" design). so I totally love your kitchen. it's great how well the tiles look now compared to when you first posted, they really excite me! and the lightshades against the black wall. and what's that dining area I see? that smoked glass table top with timber trestles and black chairs and that black and white rug? where you get those?! I want to see more! congratulations, it's hard not to gush! big ups to Mldesign too.

Hello Stella In the flooring industry this type of flooring was called a floating floor, because it sits on an underlay. Now it is called an engineered floor (and stops the first question being about the noise underfoot).... but the noise remains depending on the level of the floor and the type of underlay. Engineered floors have a number of layers of timber/ply at right angles to allow the expansion/contraction of the grain to be controlled. The top layer is the prefinished or raw timber species that you want with the other layers in various ply. There are cheaper alternatives again that have particle board (chipboard) or mdf backing with a laminate printed pattern. These are, in my humble opinion not worth opening the box. A solid timber floor can be laid a multitude of ways. Over concrete, I waterproof the slab, level it and glue and nail a plywood sheet. The timber is then laid over it, sanded and flooded (gaps filled) then sealed with a finish being either oil or water/oil based polyurethane. It can also be stained before sealing. With the engineered floors, they come from all over the world. Some are made in China, some are made in Indonesia, some are made in Europe and so on. A major supplier to a lot of the flooring companies is a company called Premium Floors. They supply products to eg carpet shops inc Quick-step and have done for many many years. Their website is worth a look before you go out into retail outlets. As to your original question, when I built my first family home I installed a readyflor (premium floors as it happened) floating floor. The floor withstood some almighty parties (before kids) and still looks amazing 18 years later (it hasn't been sanded at all). Today, I only install solid timber floors in our work purely because of personal preference and the type of renovations we are doing, and when requested by a client we have sourced from Europe. Cheers

I am leaning toward this product CD50 EXTREME so we don't have to strip back the coating any time. I'm prepared to recoat every 8 months to keep it looking good. I'll prob use a slight tint just for extra sun protection. It's next to a pool and spa and full sun so wish me luck! Would love to get more opinions. My builder says use Sikens but I never want the issue of the finish flaking and splitting and then having to strip back.

yvonne.. re sanding cupboards I had mine professionally sanded because they were looking worn. timber is American Oak and it really didn't lighten very much by sanding. so depending on your timber you might not achieve much. i would change a few upper cabinets with glass doors, white perspex or remove a few doors, paint the back of shelving and hang wine glasses or whetever and break the load that way. I replaced my range hood with a pull out chrome one and that in itself made a difference nt tying in with the chrome handles. see pictures. maybe you could paint the legs or reupholster the stools to white...all part of the kitchen.