Not that I've got one but have heard rave reviews from those who have it... I can see merits in it particularly if it's for like a built-in laundry say in a hallway for example as you wouldn't want your washing hanging out there for all to see... but if you have a separate laundry room with a door, then I think it's either/or depending on your budget I guess (not sure of cost)... you can also achieve a similar result (which is what we're doing being in Melb too) by having wall mounted racks (that fold down when not in use) and put a heating vent in the laundry room (vent particularly good if you're planning to have a dryer coz of condensation)... good luck :)

To be honest - they are both pretty dominant for a 2.7 m stud - I like the idea of multiple hanging of similar lights. You could also purchase something less expensive and think about it until you find the perfect piece - sometimes we need to live in the zone before we see what it needs. One tip re budget - if someone walked towards you with $7000 in one hand and the light fitting in the other - which would you choose - a good temptation tester !

Ikea has very user friendly online planners where you can design your own cabinets and price all the parts..(NB also look at the non kitchen storage for suitable cabinetry..BILLY bookshelves with doors make great kitchen storage) big savings with DIY labour but the storage wall in your photo looks like you or a carpenter would need to custom make the wall OR you would need to use cabinets that don't reach the ceiling although we have some IKEA bookshelves that we plan to build in with a surrounding frame and line the gaps with wall lining which we expect to be a fraction of the cost of custom made

Hi 1991_kid If your intention is to be cost effective there are a number of approaches that you might like to take, however, the first plan of approach would be to gather as much information as possible before you begin construction. Most of this will be achieved by having a good set of drawings specifications and a very good research on materials and labor which are available in the area with reduced transport costs. This is some of the approaches that I would take; 1. If you are thinking of using a building company to do your house to "lock up" you may need to register as "an owners builder" you can find more info here or from your private "Building Surveyor", on an internet search 2. If you are thinking of using a building company that does "Design and construct" I would have a careful read of this article on my website. http://www.newhomedesign.com.au/index.php/faqs-article-based/faq-9 3. When you are considering your design I would have an independent person preferably one that does it for a living and has a few years experience monitor or vets your design. Consulting fees might be expensive but it's the only way that you will get an independent design appraisal. 4. Eventually you will have to do your "permit drawings" - Working Drawings and specifications - in Victoria these must be done by a registered person - you do not want the Builder to be responsible for this part as the person he employs will be loyal to him as he is likely to give him further work, you will most likely just give him one job, so it would be reasonable to assume that in any consideration or dispute he will take the side of the Builder - regardless what is said at the beginning. (You may also need a town planning permit depending on your circumstances) 5. You will have to vet your possible Builders and time with your build, I suggest that even if an amount of traveling is required you eventually do this face to face with at least three of your final picks - you have to get on with your Builder so a major effort on research is definitely required. It should be clear and in writing which items the Builder will purchase on your behalf, who pays for delivery and who does the installation especially of such items like windows, doors, landscaping and so on, and which items you will purchase ... etc. Specifications are nothing more than a "list" - try to keep it simple but be specific, but make sure it is written down and signed by both parties. 6. You can only get a "true tender price" from a builder that thinks he can get the job - and you can only achieve this if you have very good drawings and specifications else even a small error of 10% may mean $30,000+ depending on your overall costs. All other prices are a guestimate - a meter squared rate by the number of squared meters will give you a price - ask the builder for the approximate meter squared rate. There are many more twists and turn in this process of part/ self-build, wish you the best with your en devours, I would be happy to consult further if requested. Regards Michael.