Well, I did a trial with a few tiles and then covered them with polyurethane. The trial didn't necessarily go entirely to plan but I was able to establish that PU will be too soft. Epoxy is likely to yellow even indoors, so that leaves me with the following solution: 1. make the tiles thicker (not a big deal) use tile selection and a thicker tile bed to enable a relatively flat surface to be made 3. seal it with a thin polyurethane to protect from mess Thanks for the contributions.

I like printed glass, yes I do, but most of what we are show is pretty naf, sorry to sound like a slone ranger, I investigated the product, I had a few different areas I could have used it in this current build, with good design choice (possible) and reasonable price not possible the quotes where all a joke. I have defaulted to either depending on ,thought ,placement, nothing ,or tile, Its a bit like my wood stove hearth,I wanted glass to show the Tasoak floor beneath, I was various laughed and accused of bringing European habits (sounded dirty) I solved the issue but if you live in the pimple on the bottom of the world, design is not an option, costs get too high, availability is a joke, I feel like offering up my rather posh shed (and accent) to companies who want to try the Tassie Market (for a modest fee of course) we are five mins to the airport and I have a background in Finance and design (weird) combo, but I studied art the market was to tight so I turned to banking for my crust.

Hello again, Definitely not too warm. I am not entirely sure what paint colour you are thinking of but as pointed out - easier to adjust paint rather than the other way around. If the tiles were really grey and the walls were that tone as well, it would be a very flat, souless look - the slight touch of warmth in the tiles is a good thing and honestly being so neutral your options are huge with colour of walls, particularly if you are intending to use this tile throughout. May I suggest you choose a paint colour and then use different depths of the same colour depending on sunlight, dark corners, more impact in certain areas etc to create the interest. Be wary when you have such a neutral, albeit very tasteful tile, it may be wise to adjust the paint in this way to lift the level of interest. Take a look at the following colours - Resene House White and Resene Concrete as starters - very unobtrusive. You could always go for a hit of charcoal in areas too. Avoid any "feature" walls - do the whole room - nothing wrong with strong, dark colour, even in small rooms - think powder room or laundry if you are not brave enough to do an entire, larger room. I am also assuming you will be introducing plenty of white trim on skirting boards etc - for what it is worth, my go to white is nearly always Resene Alabaster. Loving the sound of the carrara - such a classic. Hope that helps :)

Thank you robandlyn. I am definitely leaning towards the karndean especially for the kids. I might use it for a splashback?? hi the interior therapist. Thank you for your reply. The budget that was put into our build (by the builder) makes hardwood floors an extra $23k. Although the 600 x 600 are expensive to lay it still comes in at less than half the price including bathrooms. We had hardwood in our last house, I liked it but it scratched and dented with chairs and kids dragging their sandy bikes inside. i am worried that I will choose the tile and hate the cleaning and potential slippery accidents in summer but I worry about the look of karndean....... is it very plasticky? I have some samples but it's very hard to tell from such a small piece. Is the tile we have chosen too 'busy' for all areas? Maybe I have really bad taste and it's an ugly tile lol Thanks so much for all your help guys :)