hi there, yes you can cover slate floors depending on the finish of the floor in question. Slate floors vary depending on the finish and the quality of the slate. The majority of slate floors I have dealt with have come with two major factors to consider: A high quality natural slate floor hand laid will have variations in the floor surface. the only way to properly cover them is to grind them down to an even layer - very very messy. There are a number of high quality materials that are economic that you can use to cover them. The range of new vinyl flooring which looks exact;ly like timber is superb for this type of flooring. I recommend FORMFIT which is a vinyl floor plank that has an inbuilt rubber underlay for sound proofing but is inflexible in nature so that it will not lose its shape and is perfect for existing tiled floors with large grout lines ( you will not see the grout lines with compression) once it is laid. It is also sun-proof and water resistant and can be laid in wet areas (laundries, guest toilets and even bathrooms - so long as there is a hob for the shower recess. The installers will generally do a site visit to guarantee the material is APPROPRIATE for the surface area. So I recommend that you always get a product and installation GUARANTEE. This is the warranty that will ensure the correct material has been installed for the existing surface area. Some slate floors will still require a self leveling concrete after grind down - but again it depends on the variations in the floor. Some Slate floors are perfectly okay to have this material laid straight over it and require no real preparation. Again I always ask for my manufacturer and installer guarantee for every job. The installers will also advise you whether your doors ( if you are using the material in rooms) will need to be skimmed as each plank is approximately 5 - 6mm in thickness. I can highly recommend the new vinyl planks - do not be deterred by the material - the quality that has been developed for this material has surpassed its previous namesake and it is superb underfoot. The thickness of the plank and the engineering of this manufactured product is designed for hard use and wear and tear and is very difficult to scratch - they were originally manufactured for retail flooring surfaces. I have completed over 50 renovations in the last couple of years using this product and can thoroughly recommend it. If you are after a good supplier I am happy to recommend my supplier and installer ( if you are Perth based). Ive had several private emails asking me to further elaborate on this topic so I hope this is clear! Please advise if you need any further information! Happy to Help! Cheers Lorena

Hi Ginny, What a great room! Artwork always adds personality, ambience and interest to a room. Please see attached some images of your room with some original artwork by Australian artist all of which are available on hatch-d. Artwork depends on your personality and the size and lighting in your room. I'd be very happy to help you find the right pieces for your room at a great price. Just email me through the website and we can start an obligation free conversation. Best, Jacqui

Yeah, no, doesn't make sense to me. If you want a TV in the bathroom, I would think it would be to watch in the bath, which isn't possible here. Surely in the shower you wouldn't be able to hear it? Also freestanding bath in the corner just makes me think of how difficult it would be to clean around, plus no flat space for toiletries. I think an updated integrated bath similar to original or back to wall bath would have been better in that space. Love the colours and vanity, unusual not to have a mirror over the vanity.

Hi Sarim, at first I thought that this gap was incorrect. But then I looked back on photos of our home when we built, and the builders did the same. Our kitchen is wonderful, no problems with benchtop or little creatures into our home. I have attached photos of before and after.