Hi there, When selecting a flooring material, you need to consider intended use. A ceramic wall tile will absorb (0.5% or higher) much more water than a porcelain floor tile (under 0.5%), and as such, should not be used on a bathroom floor. Wall tiles are softer and less dense than floor tiles, wear easier and are not designed for foot traffic. Floor tiles may be used on walls, but wall tiles should not be used on floors. In regards to slip resistance, it depends on intended use. If the project is a residential floor, than it is the decision of the home owner if they wish to use a slip resistant product or not. Australian Standards apply for commercial projects (please contact us for more information if this is the case). I would suggest you contact your supplier as they should be able to inform you of that specific tiles use and performance in a bathroom setting (I won't speak on behalf of your supplier). Please feel free to contact us directly via email for more information - info@earp.com.au Hope this helps!

We had same problem with a rental, White Knight do a product that is easy to paint on, it's a two part product. You do have to leave for a couple of days to set properly. My husband not being a painter I did it myself, really easy. It's a good couple of years ago now and it's still going strong. It's available at Bunnings maybe Masters. I'm not sure about colours, we just did white, made such a difference. Cheaper alternative to replacing especially if they are still in good condition and colour is only problem.

Try googling 'Kitchen and Bathroom Resurfacing' to find a professional in your area that can respray the tiles for you. They remove any fittings that need to be removed and put them back when finished, they will fill any holes before spraying and if you want a true white colour, theirs will stay true white (not go yellow) because they are properly UV stabilised. They use a product that sets super hard, they're cheap and they guarantee their work! No, I don't work for them, or know anyone that does, but I have friends that have used them and have been thrilled with the end result.

The appeal of a highly polished natural marble, limestone or travertine shower is undeniable every owners wish! Below is a photo of how you DO NOT want your beautiful marble shower to look. However it is an area prone to the build up of soap scum on walls floors and glass and the accumulation of mould on silicone. Daily use and exposure to hot water and chemicals can leave the stone, grout and silicon looking dirty and mouldy. The Marble Man (1300 627 626) specialist cleaning services has over 27 years experience in polishing marble, limestone and travertine showers to remove soap scum, mould and discolouration from the stone walls and floors. Our cleaning process respects the integrity of the stone. With the right products and cleaning systems The Marble Man technicians will restore your stone shower walls and floors. Making them feel smooth and looking sparkling and revived again. Free proposal for stone restoration services and inspections simply CALL 1300 627 626