I agree with the first comment. Check out the Maximum porcelain panels. Ice attached a photo I took of the slabs. Statuario is in the front and Calacutta is behind it. http://maximumaustralia.com/products/calacatta This is the Australian link to the product range and there are plenty of photos of it actually in use. In person the design looks less printed in my opinion than the Caesarstone, but everyone has different tastes and that should be respected.

Sooooooooo much better! Looks great!

I would look at a the following cabinet colours. These are Sherwin Williams colours, which is now under the Wattyl brand. Your paint specialist should be able to mix colour. With your busy quartz and the Saltillo floor something soft in the white to pastel green would suit.

Hi, I had my kitchen renovated and chose a calacatta oro/gold subway tile for my counter to ceiling feature wall. The assistant tiler applied 3 coats of Aquaseal Gold+, after drying, he applied the Mapei Ultracolor Plus 103 Moon white grout, then cleaned it up with hot water. Normally, it would just be 2 coats of sealant, but I was so upset that day because his boss, the main tiler, insisted to use a Aquaseal Gold+ which he reckons as superior instead of using what I requested (Lithofin MN Stain-Stop). To calm me down, the assistant tiler did 3 coats. The main tiler wasn't around to supervise the assistant tiler due to other commitments. Anyway, after the grout had dried, I noticed that some of the tiles have this thick grey outline. It's not for every tile though. Due to this, it made the grout line thicker than it really is. It's been 3 weeks since the tiling job was completed. Any thoughts what happened here and can this still be remediated w/o tearing down the tiles? Here are two photos - the 1st one with thick border and 2nd one with very subtle/thin border.