It was one of the colours the Dulux rep recommended. If you can, get sample pots and try them out. Best way to check your colours as photos don't always give a true reflection of the colour. Then you can have a look against your tiles and in different light.

Hi Suzanne The panelling in Perth is usually done with (believe it or not) Cedar panels / planks which are then prepped and painted. Most of the high end work is done this way. You can do it in MDF however and any good chippie will make it work. We recently restored a 100 year home in a Hamptons Style home and all of the stair well panels were cedar also. The second storey panelling we did had to be fabricated in MDF to get the detailed sizes and other than the dents in the old (from many years of enthusiastic use) you can't tell the difference. For skirting, a lot of the profiles are made up as one offs by builders that are used as a kind of signature. The same with doors. We made new solid doors to match the old at a timber joiner. The skirting and door profiles are usually made up by executive doors and mouldings in Malaga. They have a good range for you to start with as does Subiaco Restorations in Osborne Park. Cheers

That’s a good idea, we’re going to go with painter on the first room, once he leaves we can decide whether or not we paint the trims. More work, but playing it safe!

The second look like they are designed for stairwells so I'd be a bit wary about using them up higher as the light might be a bit "spotlight" and not diffuse enough. I think both styles work with your house design