Old post but thought I'd update. We have finally moved into our forever home and on occasions, obviously in winter, we still have crying window (sob). We have the wet windows on the south side of the home which is the shady side so not unexpected but also on the north side where we still get lovely warm winter sunlight streaming in and I still do have all my windows slightly cracked open and it does help. Incidentally I have glass bricks in our bathroom on the south side and there is no condensation on this window at all. Our home has insulation in both the exterior and interior walls and we have double insulation in our roof, so factor 7 unlike the usual factor 3.5 not that it probably has any bearing on the moisture issue. We have a 1.8mtr wide veranda surrounding the entire home so the windows are some what protected from the elements but when the temperature gets fairly low and can be almost zero in winter, it seems impossible to prevent this crying window sindrome but I can live with the fact it is fairly easy and quick to remove with a Karcher window vac now, brilliant little machine at $99 and it only takes a few minutes. We have an exhaust fan in both bathrooms that is vented outside so the moist air does not go into the roof space and in fact even my rangehood ducting is vented outside too!! We even had condensation in the roof cavity as well to the point of having a rainforest up there but since fitting another whirlie into the roof making it three in total now, it appears to have almost entirely eradicated that problem. I can say catagorically now that crying windows are a very difficult problem to eradicate in very cold climates where obviously the inside of the home being heated at night is going to create the perfect conditions for the condensation to settle with the inside being far wamer than the outside and there in lies the problem which canot be changed. I have blinds and curtains that I close ever day before dark but it makes no difference. As I have aluminium windows and doors throughout, so no timber anywhere, it isn't such an issue for damage but annoying none the less but life goes on and I do so love my beautiful new home!!

It's a neat concept, but highly impractical for a wet, coastal climate of BC where I live. We could only have the wall open for roughly 4 months out of the year. And those open months would need a screen, big time. I'd forever be the one to be walking into the screen, which would bug the heck out of me (pun, lol), so I'll just pass on the whole idea. It's like the convertible car owners up here. We'll get a nice, sunny day in winter and you will see these people with their tops down, but wearing toques, lol. Or they will take the top down on the first sunny morning in spring and by afternoon it's pouring rain, again. Convertible in BC? Extremely seasonal. Convertible wall in BC? Ditto.

Hi Catherine, the glass panes in a louvre window overlap to ensure an effective seal against wind and water. We sell thousands of louvre windows each year and sealing of blades has never been an issue. However, you should always check that the manufacturer you go with and products you select comply with industry standard AS2047:2014. Products must comply to this Australian standard for wind and water penetration and are independently tested, before they can be certified compliant. All A&L products are certified compliant with this standard.

We have been building our house for over two years now. The supply chain downturn has made it a nightmare. We are camping on the mezzanine floor of our warehouse so it isn't costing us to wait, but if I had rented a property while building we would be in trouble now. I purchased most of our plumbing supplies early in the build so at least those items have not gone up in price, but many others have. We ordered and paid for a cantilever pool awning in February this year, and it was sent in three lots. The last delivery was two weeks ago. I suspect the company was having a hard time getting it out of China, so not their fault. We had quotes for fly screens/security screens that totalled over $25,000. We had to forgo the security screens in favour of fly screens for most of the house. We had a quote for a large aluminium mesh panel to place on the front left corner of the house which was over $25,000 also. The fencing company got an order wrong and we ended up with the wrong colour louvre panels on the front driveway sliding gates, plus the wrong colour for a fence. We have managed to turn it into a positive by keeping the wrong coloured louvre blades, and they will now be put up vertically on the front corner of the house, instead of the aluminium mesh. They are six metres long, but the house is two stories, so all good. We had to keep the gate panels the same, so the wrong colour will have to be exchanged for the right colour. People are still building houses here, and some of them are going up very fast, so I don't understand why ours has taken so long. We have purchased most of the goods locally, but I suppose the suppliers are having trouble getting them from overseas. I am at the point where I am losing interest in this house, which is a shame because it will be a beautiful house when finished.