It is just a great patio beer drinking table with a great view:) I couldn't get a picture of the table and the view because I didn't have the room with just a camera phone but this is the view from the top of the patio with it:)

I have miles of decking at two houses. All timber when put in the Australian sun will suffer. When building our beach house we decided to go for Spotted Gum and let it grey. Why fight it? We applied Cutek, and will on a regular basis. At our main house we have lots of Merabu or Quilla. Will not grey the same, and leaches lots of red stain. Cheap, but would not use again. What ever you use, use a good quality oil that seeps deep into the wood not a traditional stain/or top finishing product.

Hi Amanda, the hexagon tiles on the floors will absolutely look great too and if that's the dream, then go for it. Personally, I would also try to run the hex tiles up and over the bath hob if your budget allows. A light grey grout (instead of white) and also sealing the grout properly will help to maintain. I like both vanities, they are very similar, and would probably go with the one that offers the most drawer space as there's not a lot of storage in the bathroom (speaking of which, add a niche in the shower area if you can). Also bear in mind the toilet roll holder and make sure it can be fixed to the side of the vanity despite the drawer (as you can't fix to the other side of the toilet which I presume will have a glass shower screen). Lastly, I know you've already mentioned white, but have you considered timber (or timber-look) panels for the drawer fronts? It's just a suggestion, but it will bring some warmth into the modern space and may also be another way to tie in with the federation style of the home. Found those couple of photos to give you an idea how you can introduce timber... https://www.houzz.com.au/photos/designer-bathroom-project-contemporary-bathroom-melbourne-phvw-vp~32381930 https://www.houzz.com.au/photos/neutral-bay-house-contemporary-bathroom-sydney-phvw-vp~19885477

I just hope your opening is wide enough for what you want. If you need to make it wider then you will also need to consult a structural engineer for a lintel design to span the wider opening before the builder starts. You may want to do your research on stacker and sliding doors first to find a manufacturer that you like and tell your builder the colour and the manufacturer before he quotes. Don't leave it to your builder to decide as he will just get the cheapest. Get a builder to quote if you are using aluminium doors. They have to be measured precisely and ordered by the builder (who takes a risk if he makes a mistake when measuring). Do your research so you know what you want, and how it works, rather than get your builder decide based on what is easiest and cheapest to install. Dr Retro of Dr Retro House Calls/Dr Retro Virtual Visits