I think they're a great timber flooring alternative for those on a budget!

In my opinion yes, the outcome is a much more solid underfoot feeling without movement and with reduced noise. Hopes this helps, MKG

Hi Badobbs Structafloor will only span 600mm unsupported in the 22mm and 450mm in the 19mm version so no, it alone won't fix your issue. A simple fix would be to pull up the floor in the affected area and then 'pack' it up to level, THEN lay some structaflor over the new supported sub floor. This is done by getting a laser level and marking out the low points in the joists then making up packers to suit, or installing a packer and planing it down to suit. It depends on the level of dipping. It will be your cheapest option and definitely a job for your carpenter (unless you're handy). Regarding disturbing the floorboards that is nonsense. If there are other issues such as other sagging floorboards then you can address them at the same time, or fix them down properly with screws. I suspect that the real issue is that the wall removal did not take into account that the floor joists are usually fixed to it and they are now unsupported. If you get under there and find issues with your joists/bearers then it is not a big deal to install a couple of stumps/connect bearers to support them whilst it is open. We do it all the time. Either way laying a new floor over a subfloor without addressing it would be a waste of money and will degrade your new floor. Cheers

Sadly no cabinet maker confirmed the ends are structural to the cabinetry and must on the slab as it would cause a floated floor to buckle. We are now rethinking flooring. I love the laminate product we want to use but have been told you cannot glue/adhere laminate to a slab. Happy to be corrected if this is not the case.