Louie - pretty well I think. See my latest renditions below. I have been playing around with how to screen off that toilet/shower area from the living room. Not only would it be preferable to keep the toilet out of sight, but it would also be nice if people pop go down and up the stairs to visit the toilet or shower without having to do a short "walk-of-shame" past the potentially occupied living/dining room. I was thinking a of having a partially-drawn pair of curtains or perhaps one of those dangle-y "fly curtain" type things to disrupt the view a bit, but then I thought a set of swinging doors with tinted/diffuse glass in them, because: 1. You can charge in and out of this busy area by just pushing through the set of doors, and letting them swing back in to place behind you (like saloon doors) 2. The glass panes will still allow the person to see if anyone is on the other side, so they don't bowl them over. Will also let natural light in. Also means could do away with the laundry door perhaps, since it will be kind-of redundant (main purpose was to eliminate washing machine noise in the living area) 3. The doors also stop heat from the fireplace drifting up the stairs on cold winter nights when the fire is going. Not a crucial thing at all, but a nice additional benefit Thanks for sharing the floor plans - it's given me a much clearer picture of what you've done with that pole house...looks fantastic! brizcs - great point about the chair by the window, that's really struck a chord with me so I am toying with ways to do this. One idea I had is in the plan below: Rather than put a narrow table hard against the glass, maybe swing the kitchen table 90 degrees, make it longer, and have people sit along the south side looking out the windows most of the time. When it's night time or there are lots of guests or whatever just drag the chairs to the other side and you're back to the conventional set up. If a table where flush against the windows it would mean a lot of direct sunlight on its surface throughout the cooler months, due to the low angle of the sun (glare might become a problem?)

Hi there, Sorry for the late reply. The furniture come from the Try Before You Buy concept is already fully assembled. Its main purpose is to send out the chair which the customers are able to test and also style within the room. Having said that, the T&C's does not apply to the Try Before You Buy furniture. Thank you for pointing that out though. We shall get the T&C's updated so that it does not confused the customers.

You have a mixed colour palette & an eclectic range of furniture which means that you will end up with a very interesting room indeed. First suggestion: reposition rug so that all of the sofa sits on it equidistantly. At the moment your main colours are: chocolate; white; tan and grey from your sofa, entertainment unit, dining table, kitchen etc. These colours always look great together particularly if they are teamed up with black. So I think if you choose the right artwork with these colours; add copper items to top of your tables and choose cushions in these tones the whole room will come together. You will successfully mix old and new & it won’t be too bold for your taste. Note: artwork should be purchased first & be landscape in orientation. Could your existing artwork hang in the kitchen or hallway as it would be seen from the main room? To give you an idea of what I mean see pic below. Not suggesting that these items are what you would personally choose but focus on the colours and how everything is tied together. PS you could put some of your ornaments on the coffee table.

Hi SonaandDi, In case you haven't come across it, here is the link to my finished kitchen: https://www.houzz.com.au/discussions/5598603/renovation-of-our-1956-red-brick-triple-fronted-home-all-done This layout has the potential for issues, but I tried to factor those in by noting where the fridge doors came to when fully opened. I should have allowed a little more width for the fridge gap, as the theory didn't quite translate in practice: on the plans I allowed the minimum of 20mm either side of fridge, but ended up with only about 13mm (was not fun getting the fridge in!). So my suggestion is to make sure there is 50mm either side of fridge. eg the fridge space is 1000mm wide for french door fridge around the 900mm mark. Even so, my doors do open fully (vegie drawers slide out unobstructed), as the doors themselves sit forward of the nib wall on the right. If your fridge space is wider, you won't need to sit the fridge out the full thickness of the doors, which may look more streamlined. But make sure you allow for 50mm space at the back of fridge. This will decide the depth of your nib wall. I calculated mine as 50mm plus the depth of the fridge to the start of the doors. You might prefer to make it a bit deeper, as the doors have more room to open due to the extra width of the space. It isn't annoying having the door opening over the pantry entry. It isn't often that someone wants to get to the pantry at the exact moment someone else opens the fridge. Even if that happened, you could get past if you couldn't wait: Good luck with your renovation! Because you can't be on site, I would always factor in more wiggle room. Let me know if I can help with any more info - I could talk about this stuff all day long!