Hi I just thought I would leave a comment about the visibility of joins in reconstituted stone such as Caesarstone tops on islands longer than 3 metres. From a patern point of view; by selecting a style that has a fine grain certainly helps with reducing the visibility of a join. As for the join itself, the technology and tooling used to make such joints has come a long way in the last 10 years; therefore if you use a Kitchen Manufacturer who uses up-to-date stone fabrication methods, then such joins can be next to near invisible. Below is a kitchen we made with an Island that is over 4.3 metres long and has a join through the centre; where the join actually has to be pointed out to be seen. We have seen Kitchen Manufactures use the two height method but you really don't have to do this to achieve a long island. If you would like a long island, then you should not be put off by having to have a join; careful selection of your material, manufacturer and planning can achieve great results. Hope this helps anyone reading this article and the comments above.

I happen to love shaker style, but it kind of depends on the mood/style you're going for in the rest of the house. Your floating shelves are already a bit modern/transitional, and most of what you see from the back of the island is glass upper cabinets so I think you could easily go the modern/transitional direction with the clean doors. If you're more into traditional, and are planning on going that direction with light fixtures and furniture, etc., continue with the shaker.

Just to confirm I have taken the great ideas presented here as advice only and have no intention to do some dodgy diy reno's. With the exception of a couple of quirky exposed timbers as you can see in my pictures there are no other exposed beams. As you can also see from the pictures there is a large roof space on the right (east) side of the house but the ceilings themselves are flat with a slight dip on the north wall. Based on my own personal experiences I would have to agree with Two's Company that there is a tendency towards rendered brick in WA (although there are still many exposed brick houses in my suburb) while double enclosed double garages are also highly desirable. I would also agree that toilets within the main bathroom and non traditional laundries may be considered unusual by many (but not all). Ensuites with toilets however are still very common. Also due to the nature of our work we would prefer the laundry separated from food/kitchen area. For a 4x2 house it is only around 155m2 excluding carport/alfresco which makes the rooms feel quite cramped, hence the desire to open up the family room. However, as Two's Company suggests we will need to first get a builder/eng in to check load bearing walls etc as this will undoubtedly affect what we can achieve within our budget. Having said that I still excited by many of your ideas and with luck hopefully can work some of them into the budget. Cheers all :)

Depending on money, I would move the kitchen to the rumpus room, make it L-shape, along back wall & laundry wall, There should be space for a decent sized island bench running north-south. The west wall could be windows, bi-folds, sliding doors etc. A pergola/undercover area would help with the sun & could be opened to kitchen/family room. I would also make the bar a walk-in linen cupboard.