Hi Tina, thanks for posting, it is all looking great. Shame about the panelling, but sometimes these things happen for a reason. It is great the armoire matches the doors so well when they are all on one wall, but I don't think you need to have the bed and side tables matching, especially when they are on another wall. My issue with painting furniture, while I love it, is the maintenance. It does chip over time and becomes one more thing to paint. I don't know what the timber is in your furniture but another possible option, especially to give you the coastal vibe is to lime it. To do this successfully, you will need to sand all the existing stain off it and go back to the raw timber. The darker the original timber, the less limed look you will get so bear that in mind too. I did an old bunk bed up that had seen better days, for my grands bedroom. It was a dark red wood, but with 4 coats of stain I got the look I was after which was that driftwood/coastal look. The whole thing looks totally new again. Sorry I can't post a photo as this function no longer works for me. Have a look at the Feast Watson range of liming stains, they have some gorgeous soft colours as well, but they let the timber show through rather than having the solid painted look. It is a very easy product to use, it dries quickly - I did the 4 coats over 2 days effortlessly. The hard work is in the sanding.

@ Luke Buckle yep that’s the one. Has 1000w/200w switchable. I just put an oil heater in there 2 days ago to trial and room was toasty in under 5mibs WITH A non instant oil heater so a fan type wouldn’t take long. Also consider the heat lamps are 250w so 1000w total if all 4 are on. They feel like they are frying your head off from above when blazing all 4 lamps so depends on what “feel” you want also. As someone mentioned, let alone the cost of lamp replacement. Having been in lighting industry they wouldn’t last super long either (perhaps newer ultra violet do but their also pricier again)... I’m no better either!

- Any wood fired heating we have would be purely run with wood from our farm, as opposed to buying anthracite. We would really like to have woodfire doing at least two jobs, i.e. cooking and heating/heating and hot water/cooking and hot water (as we are under the impression that solar hot water would not be enough in winter??). There's nothing like lighting a woodfire to keep your house warm, except for the great big hole in the insulation that it causes. As beautiful as they are (and I'm a massive fan of open/wood fires), they are pretty bad when it comes to ceiling penetrations. A lot of insulation is lost by having an open fire, a wood heater not so much, but still bad enough. For heating, the best advice I can give is this. You need a battery storage system! Then whatever type of heating you go for, you won't run out of energy for your cooking, cooling or anything else you won't to run at the same time. I believe this is a necessity, not to mention a very smart investment. If you want to be off grid, then be completely off grid. I personally don't believe in still being connected to the grid and having the energy your home creates, sold back to you for an absolute pittance. If you invest in a good battery set up, it'll last you up to 15 years and you'll have never have to worry about heating or cooling. I visited a house about 12 months ago that was off grid for power. They purchased an induction cooktop and electric oven, that way the idn't have to worry about refilling gas bottles or having a gas bill come in either. They didn't have the smartest idea when it came to lights as they were still using halogen's, but even still, their battery system never went under 80%. Even during winter, with two teenagers, and a couple of plasma tv's, playstations and all other sorts of electrical goods that they used. They were never too careful so as to make sure they had power in reserve. They just lived life and if they needed to make adjustments, then they could've done. But they didn't need to. That was all done with a 5.5Kw/H system. You'd be surprised how well solar hot water works. It just depends on the type of system you get. Again with battery backup, you won't need to worry. - We are planning to insulate the slab, but have not gotten as far as deciding what product we would use, are there several different products like the one you described? We do plan to have polished concrete flooring throughout the entire house – with the possible exception of bedrooms on the south, if absolutely necessary they will have carpet. I know it's probably more expensive, but I would recommend the Kingspan K3 Floorboards. It is a brilliant product and I recommend it to be used in all my jobs. The effect it has on an energy rating is massive. Depending on the layout and orientation of the house, just by adding slab insulation, I have noticed an increase of almost a full star difference in the rating. So that's from 6 star compliance, to 7 star above average. Here is the product site: https://www.kingspan.com/au/en-au/products-brands/insulation/insulation-boards/kooltherm-k3-floorboard - We will also be aiming to have the optimal amount of glazing for solar gain (and prevention of heat loss). I still haven’t worked out why I can’t upload a picture of our plans, but will do ASAP as we would love to hear feedback on our plan. As for the layout, you just need be mindful of window sizes and orientation. If you have the time before you build to play around with a few different variations of your plans, it might be a good idea, as just by changing a couple of small things, it can give you large benefits. One of the main focuses I have with my business is to help people such as yourself utilise the energy rating software to make small changes at the design stage, instead of just using such a powerful tool at the building permit stage. By then it's too late to make any significant changes. Just keep that in mind. It's a small price to pay to know that your house is going to be as energy efficient as it can be. If you want to, feel free to email me the plans and I can give them a quick look for you. Just to give you some quick advice on them. Giuliano green design & consulting

Hi Penny, Interesting question! Sounds like a unique project. If you're thinking of a hydronic ceiling heating installation, generally they work the same way as underfloor heating systems but are much more expensive to install, due to the technical nature of installing pipework in the ceiling rather than just laying it on the floor. If you're looking for a hydronic system (eg with a gas boiler) then the easiest retrofit option is to look at some wall-mounted radiators. Alternatively, you could look into some type of ducted system which is probably not too expensive to install if you can find the space in your home for the ductwork. Best of luck with the renovation!