Hi maryprior892 Thanks for posting the extra information it all helps in gaining some understanding, I think it is possible to improve this existing house in a cost effective manner. Just a minor item that I picked up in regards of equipment - I think you mentioned that the existing STORAGE is actually a covered internal courtyard - I also notice that you have a hot water unit in this space - you should check that the hot-water service (if it is a gas unit) that it has sufficient ventilation and is not an external units that has been closed in - any plumber will give you this information - enclosing gas units that are designed for external use is not a good idea. I think that if you are going to make changes it not only should suit you, but also have a good resale opportunity - considering your upstairs areas it might be better to add a decent En-suite and walk in robes and getting two or three bedrooms downstairs - in this way you would have parents areas separated from children - this might have better resale and use that a tiny ES. The third bedroom downstairs could be gained by enclosing the RUMPUS room and providing access to bathroom areas by a corridor to existing bathrooms. This would also aid in getting containment areas for heating - at the moment the plan shows one open space including the upstairs - lots of heating in winter in Tasmania for all that area - some compartmentalization would probably help in combating yearly heating costs. The existing living area are certainly ample, so the loss of the rumpus to a bedroom does not detract greatly to the overall house, and in the meantime you could use the new downstairs bedroom/rumpus room as you have already mentioned as a library. I think this is achievable, but before doing a physical change, I would have a fully developed plan which includes all existing and proposed furniture to scale, with a few 3D views to enhance the concept. (It easier to change drawings than walls - a lot less dust and much cheaper) I would then obtain the opinion of a Real-estate agent (the Real-estate agent you bought it from is not a bad place to start) and maybe two others. This might help in making long term decisions in regards to investment for the future. Staging your proposed renovations is also another approach that you might investigate. Above all I would retain and obtain as many ocean views that you can possibly get, I assume that the ocean views are at the front of the house (" revealed an open fireplace in the front lounge which also has ocean views so that is fabulous.") If possible you might consider developing an external eating/sitting/entertaining area with ocean views - I certainly would be a buyer, and I would assume that it might be supported by the real-estate agent. I hope this is of some help, I would be happy to comment further on this design as more information becomes available. Michael Manias Manias Associates Building Associates mm407p@gmail.com

subject to correct measurements, your idea of moving the laundry sounds good but do you really need the expense of installing a side door...why not continue taking the washing out through the doors to the deck, accessing the laundry through the kitchen doesn't need to affect the entry and instead of joining the study with the old master bedroom, why not include the study and back bedroom and ens for a new master suite with the best view and by relocating the toilet, opening up some internal walls and a new kitchen layout you could achieve the open feeling you're after ...but only correct measurements will confirm the possibilities especially info about the block, roof and walls

@Michael Smith - Where do you start? Similar and in addition to Dr Retro's comments, my advice as a starting point for any project is always the same: define your project requirements and nominate a budget. All decisions moving forward will derive from the balance of these two elements within your particular context. you need to refocus on the front end of the process, and set aside the backend construction for the time being...Since you have had no prior experience in this area I highly recommend you invest in experienced professional assistance with the process. It's a given that this type of project (involving building extension/structural adjustment etc) will require building approvals and/or potential planning approvals that require a process of design and development of professional documentation accordingly. Unless you have had experience in these types of things recommend you don't try and manage something like this unless you have a lot of free time, up for the task and are will to engaged/committed for a rather steep and potentially expensive learning curve. False economy in this area is a significant risk and easy trap to fall into for the inexperienced in this area. For something of this scale an appropriately selected builder will integrate the project construction management far more cost effectively that you can achieve independently as a newcomer. This general type/scope of project could be anything from 3-6 months in construction (depending upon the builder/circumstances/detail and whole lot of other factors) but you're getting ahead of yourself with this as first things first you need to establish the project scope and work through the process of design and documentation appropriately for any applicable approvals. If you're interested in further information please feel free to contact me directly - we can similarly service projects of this nature in the Melbourne area.....always keep in mind that there are different levels of professionals and you need to work out exactly what you require in this regard. Are you requiring higher level design assistance? Or do you just need someone to "draw it up" as you know exactly how you want it to be, and can get away with a drafting service.....questions for you to think about and work through/research accordingly..... @anotherbird - this stage can be particularly challenging when you have designed and documented, and then are left on your own to sort through and compare the "apples and oranges" quote differences, and it's not straightforward. I think here it depends on the builder you select. An experienced and competent builder should be able to have some of the things you've mentioned integrated into their process such as the building permit, and also providing advice as to the construction scheduling and how the decisions of finalising the kitchen design etc will be coordinated into the job. Sometimes builders want everything designed and documented prior to starting, others are more flexible and have the capacity to work from contractual allowances and refer you to//utilise their regular tried and tested subcontractors/suppliers to pull it all together collaboratively and sequentially. My advice is trust your instinct with the builder and go with the one that you feel you can work better with, rather than the one who is giving you the best price...the project will ultimately cost what it will cost, and more often than not it's better to pay a premium for less stressful build process with an operator that is tuned into your particular circumstance and needs, rather than go with a guy who might be cheaper but is more about "smashing it out" for lower cost and putting a lot of the responsibility of coordinating fit-out aspects yourselves.... hope this helps Best of luck with it all to both of you :) PD

Is the corner of Bedroom 4 on the setback? Drawing a line out from there parallel to the boundary might give you enough of an idea to play around with some concepts? For proper plans and quotes, I agree with the advice to seek original plans and more detailed advice from council. What "doco"? General setback requirements? What about easements for that particular block? The existing materials, etc question is important. And how old is house? If it might contain asbestos that needs to be addressed before proceeding, for both safety and budget.