We had a Vic Ash floor laid recently in our living room. The floor polishing person we used was excellent in every way, including helping us choose which products to use, which was a great start. He said that polyurethane gives timber that tan colouring, but water based (non-toxic) finish doesn't develop any colour - so you get the natural colour of the timber, intensified just a tiny bit as if it is wet - our finished floor is beautiful. If you want the timber tinted, they have tints they can apply before sealing. The water based non-toxic finish is more expensive, but more durable than polyurethane, and not high gloss which I dislike, so I decided readily that it is worth it. We are in Melbourne and the business name of this gentleman, Sasha, is S&A Flooring Services. They were very clean and methodical, leaving no mess or unsatisfactory areas of work. They did a beautiful job, and the finish was as he described in the first place when we chose the products. Getting people in for various advice, repairs or restorations in the home can be difficult and disappointing, so trades people like this man Sasha, and the resultant finish we live with, are a pleasure.

Hi Barry, I personally don't think the large blank space lends itself to a piece of art. It's up too high and contrary to your thoughts, it wouldn't be the feature you'd hope for it to be. Besides, the money you spend on a piece large enough, would be better spent on a smaller, higher quality piece mounted at the correct height (eye-level) that would compliment another part of your home. Getting back to the blank space, have you considered using a timber veneer for the wall cabinets? Something that would work with your bench, and then you could use the same veneer as wall panels to continue above the blank space over the cupboards. Perhaps you could even incorporate led strip lighting to give it a little more wow factor. Timber is great because it adds a layer of warmth to the polished concrete and dark cabinets. Good luck, and keep us posted! Would love to see which way you go. Cheers, and have a great weekend. Steve

Most timber stains will look good but I would go for a mid brown stain. Look at kitchen photos here on house - search white kitchen with timber floors. I just checked myself - when you enter white kitchen and timber floor- the majority of photos have medium tone (35000 images ) and only 15000 images or for dark timber and even less for light tone timber.

With pine flooring a clear coat will go quite yellow over time. You can either stain to darken the timber or you can a natural raw look finish similar to a white wash that will keep it light. Problem with pine is that’s it’s quite soft it will dint and scratch more easily and a darker stain will highlight these opposed to a lighter finish.