skip to main content

Is this range hood a KraftMaid hood?

5 months ago

I'm looking for a hood like this, but don't see it in the KraftMaid spec book. Is this a KraftMaid hood or a custom hood?

KraftMaid Renway Maple Canvas Kitchen · More Info

Sort by:Oldest

Comments (4)

PRO
Sterling Kitchen & Bath
4 months ago
Yes this was a standard Kraftmaid hood but with modifications using additional materials. We would be glad to assist you with the design and materials list for the application however we would also like you to consider working with us on your project.

Thank you
af81ad12
Original Author
4 months ago
Thank you so much. I am working with a local KraftMaid Vantage kitchen designer already (I’m also not located in PA). I will ask him about doing this type of hood. Thanks!
Related Discussions
venting a range hood
Q
Comments (1)
there are several range hoods eg Miele that can be vented horizontally and even some that can vent downward under the floor and another that has the motor outside the walls but you'll need to check with manufacturers to clarify which one would suit as you need to know exactly where the wall and floor framing is located to make sure there's enough space for installation ..rear venting rangehoods don't use less cabinet space they just avoid having a pipe through the ceiling and roof...
...See More
range hood advice
Q
Comments (1)
can it go through the wall to outside?
...See More
decorative range hood for 10ft ceilings....
Q
Comments (0)
Does anyone know a place in Melbourne that can make a decorative country rangehood for a 10 ft ceiling
...See More
Off Centre Range hood Ducting Advice
Q
Comments (4)
Some will specify distance and angles permitted. Check installation guides out
...See More
PRO
Sterling Kitchen & Bath
4 months ago
OK that is a far statement so here is the information from our designer who assisted in the hood design. hopefully this info plus your designer's expertise you will be able to achieve your goal.

Good luck & enjoy your new kitchen!

It is KM
- Whmm42.. hood
- WFS2448 for ¾ sides
- Panel curved valance in between
I showed her how to do these this way.

WFS2448 for bottom if necessary.
af81ad12
Original Author
4 months ago
Thank you very much! I really appreciate it.

Sponsored

More Discussions

Thoughts on 1960s home extension

31

Earthy Bathroom Colours: Terracotta Inspiration

6

13

Floor Plan for Queen Anne Villa

19

Styling Ideas for Spotted Gum Floorboards

2