The timing of this article is perfect! Given the erratic weather lately, shielding outdoor furniture has become a real challenge. While I've experimented with some methods here, I'm still searching for a solution with lasting effects. Do you have any specific product or brand recommendations? A big thank you to @Kevin Carol (https://qr.ae/pyDKpb) for suggesting The Cover Company NZ for outdoor furniture protection. I'm definitely going to explore their offerings. It would be fantastic if you could compare a few similar brands in terms of quality, pricing, and customization. Your insights would be highly valuable.

Thank you for all the ideas. Sometimes you think about something so much you can't see solutions. Like the ideas of umbrellas or awnings. We have 80 mm of the timber beam available to put an awning on. I think they're wider than that.☹️☹️ (There is a bolt in the beam that protrudes 2cm, it's not easily seen in photo as it is painted cream). An awning would need to sit underneath this bolt. The panels are plastic not glass and their track would need to be clear for when we open the pergola up, which we do during summer on long hot spells. We did plant callistemons about 3 -4 m away but they have not grown according to plan...lol I'm thinking the most achievable solution is a cantilevered umbrella. I think we'd need to concrete the base into the ground and remove the pole during winter. The brick area is a play area - netball etc. Any pros or cons to this idea?

Hi Love the setting! From what you are describing, it sounds like you have a ventilation issue. A deck lower than 400mm off the ground needs to have ventilation just like the house. This typically means the sides are open (doesn't happen) and the spacing is around 5-6mm between boards. If you don't have this, the water that gets in cannot evaporate and will keep the ground and the underside of the deck moist, even with your drainage as it can pool in sections. This in turn means your deck is always wet. Once that happens, it is only a matter of time before fungus growth/soft rot etc occurs. We always excavate a low to the ground deck to ensure we have 400mm of clearance to the underside of the bearers. Another way is to ensure there is a moisture impermeable membrane across the ground (plastic) covered with gravel and graded down with vents placed all around. Cheers

metal posts can be bolted to the concrete floor with a metal bracket called a "stirrup" there's a brand called Uni-pier with multiple sizes available at the major hardware stores and then attach sections of plastic lattice (friendlier for attaching plants) ...make sure the posts are installed at standard distances to suit the size of the panels..eg four panels 1200 wide x 2400 tall installed between 5 posts would allow for a wide doorway at one end or two panels could be installed horizontally between three posts with gaps at the top and bottom with a line of big oblong shaped pots for climbing plants and wall hung pots could be attached to the lattice