Hi all, great post. Hard to find alot of reviews in kitchen sinks. Ive been looking at oliveri sinks to. Got nervous due to bad reviews. @Azur Farrell I went and looked at ABI on the goldcoast. Very helpful and sales pitch was great. The lady there had installed two gunmetal sinks in her home and said she was more than happy. For me the sinks was not quite the right size. She did tell me that the colour was 3/4 the way thru. ?? This might make scratches less obvious. I need to do more research on this as its only natural that your sink will get a scratch or two over x amount of years. I had More or less decided on the spectra in gun metal. (Wanted a bigger bowl). Did you get yours Azur? Im wonder if its scratches easily. Given its only 1.2mm coating im concerned it will be more obvious. (As opposed to stainless steel) FYI A sale lady told me that Abey pulled their gunmetal sink off the market. She wasn’t sure why but they where not happy with the product. If anyone can help re coloured spectra oliveri sinks i would love some feedback. As its undermount.. it wont be an easy task to replace.

Wish i found this Q &A before. So many beautiful people advising and sharing here! I am Repainting Tropical Queenslander with dark red and orangy timber floors and this thread is so helpful. I painted Whisper white and it is throwing so much Green it makes me so sad I am going to repaint. I get loads of tropical sun in the north facing - with eastern morning sunlight. Was just about to go and buy Natural White just to cover it. Do you think it will be too dull/warm a colour. I do like a fresh feel and contrasting with vivid white decorative trims. The whisper white looks nice For a while in the morning while the morning sunlight throws read up onto it but then it returns to a green

In my last house, after adding a living room (the area you see this side of the arch) and also updating bathroom etc I couldn't afford to reline the ancient walls in my little lounge (when I removed the purple wallpaper I found a mixmax of boards, gib, pinex, plywood and holes!) so I plastered walls all over with layers and layers of newspaper and wallpaper paste (papier mache), then after applying primer/undercoat I painted with 2 similar colours (rich reds in this case), and stippled the surface with a plastic bag. This made it look just very slightly textured like leather and successfully disguised the uneven surfaces. Gallons of gap filler filled the gaps between the old T&G ceiling boards and evened out the mismatched skirting and scotia. Again white paint on all the trims. Amazing what can be done when you have to make do! This was a great cosy little room! (Before photo is the 3rd one)

Hi, I am at same stage of renovating kitchen, regional Western Australia, harder to get different but I have found these at my local tile shop, that had to be ordered in, not up yet but our house is 1960 build and I had the red brick exposed with glass over the top, while very unique and lots of positive comments it was in a chimney location and debris fell behind and I have had it replaced once to clean it up and it happened again so I am afraid it is going, I am covering with same stone as bench top in fire place but I am using some marble tiles on other area. I wanted the stone behind stove top for cleaning purposes but I love the tiles I have selected I hope they look as good once up, I agree about not wanting house stuck too much in 50/60, my bricks were red and I found it quite dark when cooking as well, I am looking forward to clean white behind stove, I actually found the harshness of the old brick a bit depressing.. I don't think industrial look is for me .. I love your lights I think I actually had them on my list... the whole look looks fabulous, I hope you are surviving, I have had enough of cooking in the laundry but I must say I could write a book on the creative gourmet using $29 electric frying pan from target, I have fallen in love with it. :)