Also have a dual purpose room. We did inexpensive white shelving units around two walls, with fabric boxes to stash stuff, (office, and my "crafty" supplies), threw in a few decorative items. Got a tall basket for rolled up mats/foam roller storage, a complementary lower basket to throw in the requisite elastic bands, small hand weights, etc. Decorated walls with pics from our travels, framed with colored mats.

Hi MJ, what a sweet cottage. I'd go for a thermal roller blind in the kitchen as it'll allow you to get your views and light, privacy of an evening and help maintain heat inside in winter - they're also easier to keep dusted roman blinds. In the bedroom, I'd go for a double railing with sheers that let light in during the day and then thermal and block out curtains to pull across of an evening. You would be able to pick up continuous thermal or block out curtains at Spotlight/Lincraft fairly cheaply - I like the continuous as you can have your curtains as full as you like). I wouldn't worry about lined curtains again as they're just far heavier and a pain in the butt with the amount of dust that both layers of fabric collect. I've got the thermal continous curtains in our bedrooms and have machine washed them and they were far less trouble when I was hemming them. In terms of thermal efficiency of your windows look at secondary glazing options - Magnetite, Ecoglaze and Justrite off options that you might find worth looking at (beats pulling out windows and replacing them).

To Australian Home Designer. Thank you for your advice but I'm not trying to replace the doors with a window. The double glass doors are on the study, and they open onto the very small balcony which measures approx 2M X 0.9M. The balcony has slate type tiles on the floor, there is a roof above and it is enclosed either side by concrete? walls. The balcony has an opening about 2 M wide by 1.5 high, which is what I'm trying to addres. The balcony is next to useless as it is and I could make more use of it if I could enclose it. I tried to add another photo to give a better idea, but for some reason I wasn't able to. So, I'm not trying to replace a window but install something in an open space to act like a window. As this area is considered common property (even though no one else can have access to it unless they walk through the apartment), I have to advise the corporate body. Chances are they'll ask for me to arrange for a by-law to be drawn up. It never ends does it? The other thing I should mention is that Council said (when I first approached them) that the developer would have used every available space to the enth degree. The developer has confirmed this with me. The block is almost 2 years old and all owners are the first occupants. Thank you for taking the time to respond. It is much appreciated.

Thanks once again oklouise for your comments. I have already been told by the draughtsman that I cannot put in skylights. No idea if this is true but he seemed quite sure and it was he who 'designed' the layout of said ensuite with what I consider a too small window because of ease of plumbing and drainage. He says that can be changed...............Supposedly only put like that to get the oversize plan in fir consent. This department is only interested in the outside view and the effect on the neighbours, which I actually dont have any. The positioning of the ensuite and WiR has changed too from the first plan as I had to come 'out' of my bedroom into a corridor past the WiR door and then into the ensuite. Technically they were both in my bedroom as had not entered the hallway but did not seem like it. So the wall you have now suggested for the door is a small lobby to the bedroom and I had planned to put furniture on it and a full length mirror. I will now look again at the whole space with three zones to see what can be done. I used the word solar tube as I thought that was the generic name for the 'tube' installed which reflected light into a room. Do they cause draughts? Have had no experience of them but will probably want to install one in my scullery (or Butler's kitchen) but am going to work in it a few months before deciding that. I am really quite a novice about function of installations and of building code.